Temperature rise induced in Si by continuous xenon arc lamp radiation
- 1 February 1982
- journal article
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 53 (2), 1169-1172
- https://doi.org/10.1063/1.330566
Abstract
It is shown that practical beam annealing of silicon can be accomplished with a high intensity arc lamp. The use of a one-dimensional, steady-state solution for temperature is justified. The Kirchhoff transform is utilized to include the temperature dependence of the thermal conductivity. Surface temperatures produced by a xenon arc lamp are calculated for 300- and 375-μm thick silicon samples, using substrate temperatures of 350 and 500 °C. It is shown that substantial reduction of the radiation intensity required for a given surface temperature can be obtained by placing a quartz wafer between the silicon sample and the heat sink.Keywords
This publication has 8 references indexed in Scilit:
- Activation of arsenic-implanted silicon using an incoherent light sourceApplied Physics Letters, 1981
- Arsenic-implanted Si layers annealed using a cw Xe arc lampApplied Physics Letters, 1981
- Heat-pulse annealing of arsenic-implanted silicon with a CW arc lampIEEE Electron Device Letters, 1981
- Radiation Annealing of Boron-Implanted Silicon with a Halogen LampJapanese Journal of Applied Physics, 1980
- Temperature distributions produced in semiconductors by a scanning elliptical or circular cw laser beamJournal of Applied Physics, 1980
- Temperature rise induced by a laser beam II. The nonlinear caseApplied Physics Letters, 1978
- Temperature rise induced by a laser beamJournal of Applied Physics, 1977
- Fine Structure in the Absorption-Edge Spectrum of SiPhysical Review B, 1958