Algorithmic Improvements to MCNP5 for High-Resolution Fusion Neutronics Analyses
- 6 August 2018
- journal article
- research article
- Published by Taylor & Francis Ltd in Fusion Science and Technology
- Vol. 74 (4), 263-276
- https://doi.org/10.1080/15361055.2018.1496691
Abstract
Neutronics analyses of the ITER experimental fusion reactor rely on increasingly complex geometry models and estimates of energy-dependent neutron flux and radiation dose-rate distributions generated at ever higher resolutions. There are significant practical challenges with applying the Monte Carlo N-Particle (MCNP) continuous-energy transport code to high-resolution analyses. For models consisting of more than 100 000 surfaces and cells, geometry initialization can take several hours, thus slowing down model integration and transport analysis efforts. In multithreaded simulations, the amount of memory consumed by superimposed mesh tally data increases in proportion to the number of threads. This behavior limits either the tally resolution or the number of processor cores that can be utilized in the simulation. This paper describes algorithmic improvements that were implemented in a modified version of MCNP5 to overcome these limitations. These improvements are referred to as the Oak Ridge National Laboratory Transformative Neutronics (ORNL-TN) upgrade. A comparison of the performance and memory usage of both MCNP5 and ORNL-TN on several relevant fusion neutronics models is presented. In these tests and in actual high-resolution neutronics analyses, ORNL-TN reduces geometry processing times from hours to a few seconds and increases in-memory mesh tally capacity from the order of 108 to 1010 space-energy bins.Keywords
Funding Information
- US ITER domestic agency (0)
This publication has 8 references indexed in Scilit:
- MCNP model of the ITER Tokamak ComplexFusion Engineering and Design, 2018
- The ITER tokamak neutronics reference model C-ModelFusion Engineering and Design, 2018
- Integration of the Full Tokamak Reference Model with the Complex Model for ITER Neutronic AnalysisFusion Science and Technology, 2018
- Analysis of Radiation Transport Due to Activated Coolant in the ITER Neutral Beam Injection CellFusion Science and Technology, 2017
- ADVANTG An Automated Variance Reduction Parameter Generator, Rev. 1Published by Office of Scientific and Technical Information (OSTI) ,2015
- FW-CADIS Method for Global and Regional Variance Reduction of Monte Carlo Radiation Transport CalculationsNuclear Science and Engineering, 2014
- Status of the McCad geometry conversion tool and related visualization capabilities for 3D fusion neutronics calculationsFusion Engineering and Design, 2013
- Rigorous mcnp based shutdown dose rate calculations: computational scheme, verification calculations and application to ITERFusion Engineering and Design, 2002