The simulation of air recirculation and fire/explosion phenomena within a semiconductor factory
- 30 April 2009
- journal article
- Published by Elsevier BV in Journal of Hazardous Materials
- Vol. 163 (2-3), 1040-1051
- https://doi.org/10.1016/j.jhazmat.2008.07.117
Abstract
The semiconductor industry is the collection of capital-intensive firms that employ a variety of hazardous chemicals and engage in the design and fabrication of semiconductor devices. Owing to its processing characteristics, the fully confined structure of the fabrication area (fab) and the vertical airflow ventilation design restrict the applications of traditional consequence analysis techniques that are commonly used in other industries. The adverse situation also limits the advancement of a fire/explosion prevention design for the industry. In this research, a realistic model of a semiconductor factory with a fab, sub-fabrication area, supply air plenum, and return air plenum structures was constructed and the computational fluid dynamics algorithm was employed to simulate the possible fire/explosion range and its severity. The semiconductor factory has fan module units with high efficiency particulate air filters that can keep the airflow uniform within the cleanroom. This condition was modeled by 25 fans, three layers of porous ceiling, and one layer of porous floor. The obtained results predicted very well the real airflow pattern in the semiconductor factory. Different released gases, leak locations, and leak rates were applied to investigate their influence on the hazard range and severity. Common mitigation measures such as a water spray system and a pressure relief panel were also provided to study their potential effectiveness to relieve thermal radiation and overpressure hazards within a fab. The semiconductor industry can use this simulation procedure as a reference on how to implement a consequence analysis for a flammable gas release accident within an air recirculation cleanroom.Keywords
This publication has 10 references indexed in Scilit:
- Consequence analysis—Using a CFD model for industrial sitesProcess Safety Progress, 2005
- FLACS CFD air quality model performance evaluation with Kit Fox, MUST, Prairie Grass, and EMU observationsAtmospheric Environment, 2004
- Evaluation of a CFD porous model for calculating ventilation in explosion hazard assessmentsJournal of Loss Prevention in the Process Industries, 2003
- Characteristics of fire and explosion in semiconductor fabrication processesProcess Safety Progress, 2002
- Flixborough revisited — an explosion simulation approachJournal of Hazardous Materials, 2000
- Numerical simulation of smoke movement in clean room environmentsFire Safety Journal, 2000
- Approaches for improving airflow uniformity in unidirectional flow cleanroomsJournal of Affective Disorders, 1998
- Explosion propagation of non-homogeneous methane—air clouds inside an obstructed 50 m3 vented vesselJournal of Hazardous Materials, 1988
- Gas explosion experiments in 1:33 and 1:5 scale offshore separator and compressor modules using stoichiometric homogeneous fuel/air cloudsJournal of Loss Prevention in the Process Industries, 1988
- Computer Simulation of Turbulent Reactive Gas DynamicsModeling, Identification and Control: A Norwegian Research Bulletin, 1984