Thermodynamic Effect on Rotating Cavitation in an Inducer
- 18 August 2009
- journal article
- Published by ASME International in Journal of Fluids Engineering
- Vol. 131 (9), 091302
- https://doi.org/10.1115/1.3192135
Abstract
Cavitation in cryogenic fluids has a thermodynamic effect because of the thermal imbalance around the cavity. It improves cavitation performances in turbomachines due to the delay of cavity growth. The relationship between the thermodynamic effect and cavitation instabilities, however, is still unknown. To investigate the influence of the thermodynamic effect on rotating cavitation appeared in the turbopump inducer, we conducted experiments in which liquid nitrogen was set at different temperatures (74 K, 78 K, and 83 K) with a focus on the cavity length. At higher cavitation numbers, supersynchronous rotating cavitation occurred at the critical cavity length of Lc/h≅0.5 with a weak thermodynamic effect in terms of the fluctuation of cavity length. In contrast, synchronous rotating cavitation occurred at the critical cavity length of Lc/h≅0.9–1.0 at lower cavitation numbers. The critical cavitation number shifted to a lower level due to the suppression of cavity growth by the thermodynamic effect, which appeared significantly with rising liquid temperature. The unevenness of cavity length under synchronous rotating cavitation was decreased by the thermodynamic effect. Furthermore, we confirmed that the fluid force acting on the inducer notably increased under conditions of rotating cavitation, but that the amplitude of the shaft vibration depended on the degree of the unevenness of the cavity length through the thermodynamic effect.Keywords
This publication has 11 references indexed in Scilit:
- Numerical Simulation for Vortex Structure in a Turbopump Inducer: Close Relationship With Appearance of Cavitation InstabilitiesJournal of Fluids Engineering, 2008
- Theoretical Analysis of Thermodynamic Effect of Cavitation in Cryogenic Inducer Using Singularity MethodInternational Journal of Rotating Machinery, 2008
- Analysis of Thermodynamic Effects on Cavitation InstabilitiesJournal of Fluids Engineering, 2007
- Influence of Thermodynamic Effect on Synchronous Rotating CavitationJournal of Fluids Engineering, 2007
- Thermodynamic Effect on a Cavitating Inducer in Liquid NitrogenJournal of Fluids Engineering, 2006
- Thermal Effects on Cavitation Instabilities in Helical InducersJournal of Propulsion and Power, 2005
- An Experimental Investigation of Thermal Effects in a Cavitating InducerJournal of Fluids Engineering, 2004
- Observations on rotating cavitation and cavitation surge from the development of the Fastrac engine turbopumpPublished by American Institute of Aeronautics and Astronautics (AIAA) ,2000
- Hydraulic and mechanical performance of LE-7 LOX pump inducerJournal of Propulsion and Power, 1993
- The Dynamic Behavior and Compliance of a Stream of Cavitating BubblesJournal of Fluids Engineering, 1973