Wear mechanisms in metal-on-metal bearings: The importance of tribochemical reaction layers
Open Access
- 29 October 2009
- journal article
- research article
- Published by Wiley in Journal of Orthopaedic Research
- Vol. 28 (4), 436-443
- https://doi.org/10.1002/jor.21020
Abstract
Metal-on-metal (MoM) bearings are at the forefront in hip resurfacing arthroplasty. Because of their good wear characteristics and design flexibility, MoM bearings are gaining wider acceptance with market share reaching nearly 10% worldwide. However, concerns remain regarding potential detrimental effects of metal particulates and ion release. Growing evidence is emerging that the local cell response is related to the amount of debris generated by these bearing couples. Thus, an urgent clinical need exists to delineate the mechanisms of debris generation to further reduce wear and its adverse effects. In this study, we investigated the microstructural and chemical composition of the tribochemical reaction layers forming at the contacting surfaces of metallic bearings during sliding motion. Using X-ray photoelectron spectroscopy and transmission electron microscopy with coupled energy dispersive X-ray and electron energy loss spectroscopy, we found that the tribolayers are nanocrystalline in structure, and that they incorporate organic material stemming from the synovial fluid. This process, which has been termed “mechanical mixing,” changes the bearing surface of the uppermost 50 to 200 nm from pure metallic to an organic composite material. It hinders direct metal contact (thus preventing adhesion) and limits wear. This novel finding of a mechanically mixed zone of nanocrystalline metal and organic constituents provides the basis for understanding particle release and may help in identifying new strategies to reduce MoM wear. © 2009 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 28:436–443, 2010This publication has 34 references indexed in Scilit:
- Metal-on-Metal Hip ResurfacingClinical Orthopaedics and Related Research, 2007
- Biotribocorrosion—an appraisal of the time dependence of wear and corrosion interactions: II. Surface analysisJournal of Physics D: Applied Physics, 2006
- Velocity and Strain-Rate Profiles in Materials Subjected to Unlubricated SlidingPhysical Review Letters, 2005
- Forced Chemical Mixing in Alloys Driven by Plastic DeformationPhysical Review Letters, 2005
- Molecular Mechanisms for the Functionality of Lubricant AdditivesScience, 2005
- Subsurface microstructure of metal‐on‐metal hip joints and its relationship to wear particle generationJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2004
- The Role Of Vorticity In The Formation Of Tribomaterial During SlidingMRS Proceedings, 2004
- Wear and Lubrication of Metal-on-Metal Hip ImplantsClinical Orthopaedics and Related Research, 1999
- In Vivo Wear of 3 Types of Metal on Metal Hip Prostheses During 2 Decades of UseClinical Orthopaedics and Related Research, 1996