Block-based multiperiod dynamic memory design for low data-retention power
- 1 December 2003
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 11 (6), 1006-1018
- https://doi.org/10.1109/tvlsi.2003.817524
Abstract
Dynamic random access memorys (DRAMs) are widely used in portable applications due to their high storage density. In standby mode, the main source of DRAM power dissipation is the refresh operation that periodically restores leaking charge in each memory cell to its correct level. Conventional DRAMs use a single refresh period determined by the cell with the largest leakage. This approach is simple but dissipative, because it forces unnecessary refreshes for the majority of the cells with small leakage. In this paper, we investigate a novel scheme that relies on small refresh blocks and multiple refresh periods to reduce DRAM dissipation by decreasing the number of cells refreshed too often. In contrast to conventional row-based refresh, small refresh blocks are used to increase worst case data retention times. Long periods are used to accommodate cells with small leakage. Retention times are further extended by adding a swap cell to each refresh block. We give a novel polynomial-time algorithm for computing an optimal set of refresh periods for block-based multiperiod refresh. Specifically, given an integer K and a distribution of data-retention times, in O(KN/sup 2/) steps our algorithm computes K refresh periods that minimize DRAM dissipation, where N is the number of refresh blocks in the memory. We describe and evaluate a scalable implementation of our refresh scheme whose overhead is asymptotically linear with memory size. In simulations with a 16-Mb DRAM, block-based multiperiod refresh reduces DRAM standby dissipation by a multiplicative factor of 4 with area overhead below 6%. Moreover, our proposed scheme is robust to semiconductor process variations, with power savings degrading no more than 7% over a 20-fold increase of leaky cells.Keywords
This publication has 19 references indexed in Scilit:
- Effects Of Hydrogen Annealing On Data Retention Time For High Density DramsPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2005
- Fault-tolerant refresh power reduction of DRAMs for quasi-nonvolatile data retentionPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2003
- A 1.6 GB/s DRAM with flexible mapping redundancy technique and additional refresh schemePublished by Institute of Electrical and Electronics Engineers (IEEE) ,2003
- Physical model of bit-to-bit variation in data retention time of DRAMsPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2002
- Analysis of radiation effects on individual DRAM cellsIEEE Transactions on Nuclear Science, 2000
- On the retention time distribution of dynamic random access memory (DRAM)IEEE Transactions on Electron Devices, 1998
- Dual-period self-refresh scheme for low-power DRAM's with on-chip PROM mode registerIEEE Journal of Solid-State Circuits, 1998
- A numerical analysis of the storage times of dynamic random-access memory cells incorporating ultrathin dielectricsIEEE Transactions on Electron Devices, 1998
- The evolution of IBM CMOS DRAM technologyIBM Journal of Research and Development, 1995
- DRAM variable retention timePublished by Institute of Electrical and Electronics Engineers (IEEE) ,1992