Measurements of greenhouse gases at Beromünster tall-tower station in Switzerland
Open Access
- 17 June 2016
- journal article
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 9 (6), 2603-2614
- https://doi.org/10.5194/amt-9-2603-2016
Abstract
In order to constrain the regional flux of greenhouse gases, an automated measurement system was built on an old radio tower at Beromünster, Switzerland. The measurement system has been running since November 2012 as part of the Swiss greenhouse gases monitoring network (CarboCount-CH), which is composed of four measurement sites across the country. The Beromünster tall tower has five sampling lines with inlets at 12.5, 44.6, 71.5, 131.6, and 212.5 m above ground level, and it is equipped with a Picarro cavity ring-down spectrometer (CRDS) analyzer (G-2401), which continuously measures CO, CO2, CH4, and H2O. Sensors for detection of wind speed and direction, air temperature, barometric pressure, and humidity have also been installed at each height level. We have observed a non-negligible temperature effect in the calibration measurements, which was found to be dependent on the type of cylinder (steel or aluminum) as well as trace gas species (strongest for CO). From a target gas of known mixing ratio that has been measured once a day, we have calculated a long-term reproducibility of 2.79 ppb, 0.05 ppm, and 0.29 ppb for CO, CO2, and CH4, respectively, over 19 months of measurements. The values obtained for CO2 and CH4 are compliant with the WMO recommendations, while the value calculated for CO is higher than the recommendation. Since the installation of an air-conditioning system recently at the measurement cabin, we have acquired better temperature stability of the measurement system, but no significant improvement was observed in the measurement precision inferred from the target gas measurements. Therefore, it seems that the observed higher variation in CO measurements is associated with the instrumental noise, compatible with the precision provided by the manufacturer.This publication has 18 references indexed in Scilit:
- Gas adsorption and desorption effects on cylinders and their importance for long-term gas recordsEgusphere, 2014
- CO2, CO, and CH4 measurements from tall towers in the NOAA Earth System Research Laboratory's Global Greenhouse Gas Reference Network: instrumentation, uncertainty analysis, and recommendations for future high-accuracy greenhouse gas monitoring effortsAtmospheric Chemistry and Physics, 2014
- Accurate measurements of carbon monoxide in humid air using the cavity ring-down spectroscopy (CRDS) techniqueAtmospheric Chemistry and Physics, 2013
- Understanding the meaning of accuracy, trueness and precisionAccreditation and Quality Assurance, 2006
- What is the concentration footprint of a tall tower?Journal of Geophysical Research: Atmospheres, 2001
- Measuring system for the long‐term monitoring of biosphere/atmosphere exchange of carbon dioxidePublished by American Geophysical Union (AGU) ,2001
- Optimal sampling of the atmosphere for purpose of inverse modeling: A model studyGlobal Biogeochemical Cycles, 2000
- Precise atmospheric oxygen measurements with a paramagnetic oxygen analyzerGlobal Biogeochemical Cycles, 1999
- Measurements of carbon dioxide on a very tall towerTellus B: Chemical and Physical Meteorology, 1995
- Tropospheric chemistry: A global perspectiveJournal of Geophysical Research: Oceans, 1981