A New Approach to Accurate Measurement of Uniaxial Joint Angles Based on a Combination of Accelerometers and Gyroscopes
- 11 July 2005
- journal article
- clinical trial
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Biomedical Engineering
- Vol. 52 (8), 1478-1484
- https://doi.org/10.1109/tbme.2005.851475
Abstract
A new method of measuring joint angle using a combination of accelerometers and gyroscopes is presented. The method proposes a minimal sensor configuration with one sensor module mounted on each segment. The model is based on estimating the acceleration of the joint center of rotation by placing a pair of virtual sensors on the adjacent segments at the center of rotation. In the proposed technique, joint angles are found without the need for integration, so absolute angles can be obtained which are free from any source of drift. The model considers anatomical aspects and is personalized for each subject prior to each measurement. The method was validated by measuring knee flexion-extension angles of eight subjects, walking at three different speeds, and comparing the results with a reference motion measurement system. The results are very close to those of the reference system presenting very small errors (rms=1.3, mean=0.2, SD=1.1 deg) and excellent correlation coefficients (0.997). The algorithm is able to provide joint angles in real-time, and ready for use in gait analysis. Technically, the system is portable, easily mountable, and can be used for long term monitoring without hindrance to natural activities.Keywords
This publication has 18 references indexed in Scilit:
- Joint kinematics and spatial–temporal parameters of gait measured by an ultrasound-based systemMedical Engineering & Physics, 2004
- Evaluation of an ambulatory system for gait analysis in hip osteoarthritis and after total hip replacementGait & Posture, 2004
- Reliability and accuracy of different sensors of a flexible electrogoniometerClinical Biomechanics, 2003
- Knee joint functional range of movement prior to and following total knee arthroplasty measured using flexible electrogoniometryGait & Posture, 2001
- Total knee arthroplasty: coordinate system definition and planning based on 3-D ultrasound image volumesInternational Congress Series, 2001
- A new method for estimating the axis of rotation and the center of rotationJournal of Biomechanics, 1999
- The kinematics of the swing phase obtained from accelerometer and gyroscope measurementsPublished by Institute of Electrical and Electronics Engineers (IEEE) ,1996
- A gait analysis data collection and reduction techniqueHuman Movement Science, 1991
- Accelerometry—A technique for the measurement of human body movementsJournal of Biomechanics, 1973
- Smoothing and Differentiation of Data by Simplified Least Squares Procedures.Analytical Chemistry, 1964