Electrical monitoring of polyelectrolyte multilayer formation by means of capacitive field-effect devices
- 12 April 2013
- journal article
- research article
- Published by Springer Science and Business Media LLC in Analytical and Bioanalytical Chemistry
- Vol. 405 (20), 6425-6436
- https://doi.org/10.1007/s00216-013-6951-9
Abstract
The semiconductor field-effect platform represents a powerful tool for detecting the adsorption and binding of charged macromolecules with direct electrical readout. In this work, a capacitive electrolyte–insulator–semiconductor (EIS) field-effect sensor consisting of an Al-p-Si-SiO2 structure has been applied for real-time in situ electrical monitoring of the layer-by-layer formation of polyelectrolyte (PE) multilayers (PEM). The PEMs were deposited directly onto the SiO2 surface without any precursor layer or drying procedures. Anionic poly(sodium 4-styrene sulfonate) and cationic weak polyelectrolyte poly(allylamine hydrochloride) have been chosen as a model system. The effect of the ionic strength of the solution, polyelectrolyte concentration, number and polarity of the PE layers on the characteristics of the PEM-modified EIS sensors have been studied by means of capacitance–voltage and constant-capacitance methods. In addition, the thickness, surface morphology, roughness and wettabilityof the PE mono- and multilayers have been characterised by ellipsometry, atomic force microscopy and water contact-angle methods, respectively. To explain potential oscillations on the gate surface and signal behaviour of the capacitive field-effect EIS sensor modified with a PEM, a simplified electrostatic model that takes into account the reduced electrostatic screening of PE charges by mobile ions within the PEM has been proposed and discussed. Label-free electrical monitoring of polyelectrolyte multilayer formation by means of a capacitive field-effect sensor consisting of Al-p-Si-SiO2 structure. The consecutive adsorption of oppositely charged polyelectrolyte layers leads to alternating shifts of the capacitance-voltage and constant-capacitance curves, whereas the direction of these shifts correlates with the charge sign of the terminating polyelectrolyte layerKeywords
This publication has 52 references indexed in Scilit:
- Label‐free electrical detection of DNA by means of field‐effect nanoplate capacitors: Experiments and modelingPhysica Status Solidi (a), 2012
- Tracing Gold Nanoparticle Charge by Electrolyte−Insulator−Semiconductor DevicesThe Journal of Physical Chemistry C, 2011
- Vertical polyelectrolyte-gated organic field-effect transistorsApplied Physics Letters, 2010
- Linear and Exponential Growth Regimes of Multilayers of Weak Polyelectrolytes in Dependence on pHMacromolecules, 2010
- Fabrication and application of a microfluidic‐embedded silicon nanowire biosensor chipPhysica Status Solidi (a), 2010
- Carbon nanotubes in nanostructured films: Potential application as amperometric and potentiometric field‐effect (bio‐)chemical sensorsPhysica Status Solidi (a), 2009
- Controlled Electrostatic Gating of Carbon Nanotube FET DevicesNano Letters, 2006
- Electrical Detection of Self-Assembled Polyelectrolyte Multilayers by a Thin Film ResistorMacromolecules, 2005
- Interactions between silica surfaces coated by polyelectrolyte multilayers in aqueous environment: comparison between precursor and multilayer regimeColloids and Surfaces A: Physicochemical and Engineering Aspects, 2004
- Determination of the pHpzc of insulators surface from capacitance–voltage characteristics of MIS and EIS structuresSensors and Actuators B: Chemical, 1997