Sensorless control of induction motor drives
- 7 November 2002
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Proceedings of the IEEE
- Vol. 90 (8), 1359-1394
- https://doi.org/10.1109/jproc.2002.800726
Abstract
Controlled induction motor drives without mechanical speed sensors at the motor shaft have the attractions of low cost and high reliability. To replace the sensor the information on the rotor speed is extracted from measured stator voltages and currents at the motor terminals. Vector-controlled drives require estimating the magnitude and spatial orientation of the fundamental magnetic flux waves in the stator or in the rotor. Open-loop estimators or closed-loop observers are used for this purpose. They differ with respect to accuracy, robustness, and sensitivity against model parameter variations. Dynamic performance and steady-state speed accuracy in the low-speed range can be achieved by exploiting parasitic effects of the machine. The overview in this paper uses signal flow graphs of complex space vector quantities to provide an insightful description of the systems used in sensorless control of induction motors.Keywords
This publication has 20 references indexed in Scilit:
- Sensorless position control of permanent magnet synchronous machines without limitation at zero speedPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2003
- Dynamic operation of carrier-signal-injection-based sensorless direct field-oriented AC drivesIEEE Transactions on Industry Applications, 2000
- Sensorless field-orientation control of an induction machine by high-frequency signal injectionIEEE Transactions on Industry Applications, 1999
- Speed sensorless vector control of induction motor using extended Kalman filterIEEE Transactions on Industry Applications, 1994
- Robust speed identification for speed-sensorless vector control of induction motorsIEEE Transactions on Industry Applications, 1994
- DSP-based speed adaptive flux observer of induction motorIEEE Transactions on Industry Applications, 1993
- Speed sensorless field-orientation control of the induction machineIEEE Transactions on Industry Applications, 1993
- Vector control of induction motor without shaft encoderIEEE Transactions on Industry Applications, 1992
- Vector-controlled induction motor drive with a self-commissioning schemeIEEE Transactions on Industrial Electronics, 1991
- Implementation of direct stator flux orientation control on a versatile DSP based systemIEEE Transactions on Industry Applications, 1991