Measuring Injectors Fouling in Internal Combustion Engines through Imaging
Open Access
- 1 December 2015
- journal article
- Published by Elsevier BV in Energy Procedia
- Vol. 82, 9-16
- https://doi.org/10.1016/j.egypro.2015.11.873
Abstract
No abstract availableKeywords
This publication has 17 references indexed in Scilit:
- Fuel injector deposits in direct-injection spark-ignition enginesProgress in Energy and Combustion Science, 2015
- On the mechanism of deposit formation during thermal oxidation of mineral diesel and diesel/biodiesel blends under accelerated conditionsFuel, 2014
- A low-cost pyrogas cleaning system for power generation: Scaling up from lab to pilotApplied Energy, 2013
- Impact of palm biodiesel blend on injector deposit formationApplied Energy, 2013
- The use of pyrolysis oil and pyrolysis oil derived fuels in diesel engines for CHP applicationsApplied Energy, 2013
- Failure of fuel injectors in a medium speed diesel engine operating on bio-oilBiomass and Bioenergy, 2012
- Comparative characteristics of compression ignited engines operating on biodiesel produced from waste vegetable oilBiomass and Bioenergy, 2011
- On the prediction of properties for diesel / biodiesel mixtures featuring new environmental considerationsPublished by Elsevier BV ,2010
- Effect of Multifunctional Fuel Additive Package on Fuel Injector Deposit, Combustion and Emissions using Pure Rape Seed Oil for a DI DieselSAE International Journal of Fuels and Lubricants, 2009
- Combustion analysis of preheated crude sunflower oil in an IDI diesel engineBiomass and Bioenergy, 2009