Mercury Vapor Release from Broken Compact Fluorescent Lamps and In Situ Capture by New Nanomaterial Sorbents
Open Access
- 27 June 2008
- journal article
- research article
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 42 (15), 5772-5778
- https://doi.org/10.1021/es8004392
Abstract
The projected increase in the use of compact fluorescent lamps (CFLs) motivates the development of methods to manage consumer exposure to mercury and its environmental release at the end of lamp life. This work characterizes the time-resolved release of mercury vapor from broken CFLs and from underlying substrates after removal of glass fragments to simulate cleanup. In new lamps, mercury vapor is released gradually in amounts that reach 1.3 mg or 30% of the total lamp inventory after four days. Similar time profiles but smaller amounts are released from spent lamps or from underlying substrates. Nanoscale formulations of S, Se, Cu, Ni, Zn, Ag, and WS2 are evaluated for capture of Hg vapor under these conditions and compared to conventional microscale formulations. Adsorption capacities range over 7 orders of magnitude, from 0.005 (Zn micropowder) to 188 000 μg/g (unstabilized nano-Se), depending on sorbent chemistry and particle size. Nanosynthesis offers clear advantages for most sorbent chemistries. Unstabilized nano-selenium in two forms (dry powder and impregnated cloth) was successfully used in a proof-of-principle test for the in situ, real-time suppression of Hg vapor escape following CFL fracture.This publication has 41 references indexed in Scilit:
- Preventing mercury emissions from coal-fired power plants using environmentally preferable coal purchasing practicesJournal of Cleaner Production, 2008
- High capacity mercury adsorption on freshly ozone-treated carbon surfacesCarbon, 2008
- Mesoporous carbons with self-assembled surfaces of defined crystal orientationMicroporous and Mesoporous Materials, 2008
- Metal sorbents for high temperature mercury capture from fuel gasFuel, 2007
- Characterization of Nanomaterial Dispersion in Solution Prior to In Vitro Exposure Using Dynamic Light Scattering TechniqueToxicological Sciences, 2007
- The Roles of Serum Selenium and Selenoproteins on Mercury Toxicity in Environmental and Occupational ExposureEnvironmental Health Perspectives, 2006
- Characterization and recovery of mercury from spent fluorescent lampsWaste Management, 2005
- Mercury speciation in fluorescent lamps by thermal release analysisWaste Management, 2003
- Catalytic effects of carbon sorbents for mercury captureJournal of Hazardous Materials, 2000
- Effect of Sulfur Impregnation Method on Activated Carbon Uptake of Gas-Phase MercuryEnvironmental Science & Technology, 1997