Fabrication of HIPped first wall panel for fusion experimental reactor and preliminary analyses for its thermo-mechanical test
- 19 November 2002
- conference paper
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1, 202-205 vol.1
- https://doi.org/10.1109/fusion.1995.534203
Abstract
1-m-scaled and 400-mm-scaled first wall panels equipped with cooling channels were fabricated by Hot Isostatic Pressing (HIP) bonding. The first wall panels fabricated are composed of Al/sub 2/O/sub 3/ dispersion strengthened copper alloy and type 316 austenitic stainless steel. With the fabricated panels, thermo-mechanical tests are to be conducted. The results of the trial fabrication and the preliminary analyses for their thermo-mechanical tests are summarized in this paper.Keywords
This publication has 4 references indexed in Scilit:
- Fabrication of a blanket box structure integrated with the first wall for a fusion experimental reactorPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2002
- Development of blanket box structure fabrication technologyFusion Engineering and Design, 1995
- Ceramic breeding blanket development for experimental fusion reactor in JAERIFusion Engineering and Design, 1995
- Burnout experiments on the externally-finned swirl tube for steady-state and high-heat flux beam stopsFusion Engineering and Design, 1989