A Cavity Activation and Bubble Growth Model of the Leidenfrost Point
- 11 September 2002
- journal article
- Published by ASME International in Journal of Heat Transfer
- Vol. 124 (5), 864-874
- https://doi.org/10.1115/1.1470487
Abstract
This study presents a new mechanistic model of the Leidenfrost point (LFP); the minimum liquid/solid interface temperature required to support film boiling on a smooth surface. The model is structured around bubble nucleation, growth, and merging criteria, as well as surface cavity size characterization. It is postulated that for liquid/solid interface temperatures at and above the LFP, a sufficient number of cavities (about 20 percent) are activated and the bubble growth rates are sufficiently fast that a continuous vapor layer is established nearly instantaneously between the liquid and the solid. The model is applicable to both pools of liquid and sessile droplets. The effect of surface cavity distribution on the LFP predicted by the model is verified for boiling on aluminum, nickel and silver surfaces, as well as on a liquid gallium surface. The model exhibits good agreement with experimental sessile droplet data for water, FC-72, and acetone. While the model was developed for smooth surfaces on which the roughness asperities are of the same magnitude as the cavity radii (0.1–1.0 μm), it is capable of predicting the boundary or limiting Leidenfrost temperature for rougher surfaces with good accuracy.Keywords
This publication has 18 references indexed in Scilit:
- The Leidenfrost Point: Experimental Study and Assessment of Existing ModelsJournal of Heat Transfer, 1999
- Validation of the quench factor technique in predicting hardness in heat treatable aluminum alloysInternational Journal of Heat and Mass Transfer, 1995
- Effect of Surface Wettability on Active Nucleation Site Density During Pool Boiling of Water on a Vertical SurfaceJournal of Heat Transfer, 1993
- A mathematical model of the pool boiling nucleation site density in terms of the surface characteristicsInternational Journal of Heat and Mass Transfer, 1988
- On bubble growth ratesInternational Journal of Heat and Mass Transfer, 1970
- A New Correlation of Pool-Boiling Data Including the Effect of Heating Surface CharacteristicsJournal of Heat Transfer, 1969
- The mechanism of heat transfer in nucleate pool boiling—Part I: Bubble initiaton, growth and departureInternational Journal of Heat and Mass Transfer, 1965
- Photographic Study of Nucleate Pool Boiling on a Horizontal SurfaceJournal of Heat Transfer, 1965
- On the Size Range of Active Nucleation Cavities on a Heating SurfaceJournal of Heat Transfer, 1962
- The effects of superheat and surface roughness on boiling coefficientsAIChE Journal, 1960