Monolithic Teflon® membrane valves and pumps for harsh chemical and low-temperature use
- 15 August 2007
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Lab on a Chip
- Vol. 7 (11), 1469-1474
- https://doi.org/10.1039/b707892g
Abstract
Microfluidic diaphragm valves and pumps capable of surviving conditions required for unmanned spaceflight applications have been developed. The Pasteur payload of the European ExoMars Rover is expected to experience temperatures ranging between −100 °C and +50 °C during its transit to Mars and on the Martian surface. As such, the Urey instrument package, which contains at its core a lab-on-a-chip capillary electrophoresis analysis system first demonstrated by Mathies et al., requires valving and pumping systems that are robust under these conditions before and after exposure to liquid samples, which are to be analyzed for chemical signatures of past or present living processes. The microfluidic system developed to meet this requirement uses membranes consisting of Teflon® and Teflon® AF as a deformable material in the valve seat region between etched Borofloat glass wafers. Pneumatic pressure and vacuum, delivered via off-chip solenoid valves, are used to actuate individual on-chip valves. Valve sealing properties of Teflon® diaphragm valves, as well as pumping properties from collections of valves, are characterized. Secondary processing for embossing the membrane against the valve seats after fabrication is performed to optimize single valve sealing characteristics. A variety of different material solutions are found to produce robust devices. The optimal valve system utilizes a membrane of mechanically cut Teflon® sandwiched between two thin spun films of Teflon® AF-1600 as a composite “laminated” diaphragm. Pump rates up to 1600 nL s−1 are achieved with pumps of this kind. These high pumping rates are possible because of the very fast response of the membranes to applied pressure, enabling extremely fast pump cycling with relatively small liquid volumes, compared to analogous diaphragm pumps. The developed technologies are robust over extremes of temperature cycling and are applicable in a wide range of chemical environments.Keywords
This publication has 11 references indexed in Scilit:
- Solvent resistant microfluidic DNA synthesizerLab on a Chip, 2006
- The origins and the future of microfluidicsNature, 2006
- Development and evaluation of a microdevice for amino acid biomarker detection and analysis on MarsProceedings of the National Academy of Sciences of the United States of America, 2005
- Proliferation of microfluidics in literature and intellectual propertyThe opinions expressed in the following article are entirely those of the author and do not necessarily represent the views of either the Royal Society of Chemistry, the Editor or the Editorial Board of Lab on a Chip.Lab on a Chip, 2004
- Solvent-Resistant Photocurable “Liquid Teflon” for Microfluidic Device FabricationJournal of the American Chemical Society, 2004
- Solvent Compatibility of Poly(dimethylsiloxane)-Based Microfluidic DevicesAnalytical Chemistry, 2003
- Monolithic membrane valves and diaphragm pumps for practical large-scale integration into glass microfluidic devicesSensors and Actuators B: Chemical, 2003
- From Micro- to Nanofabrication with Soft MaterialsScience, 2000
- Monolithic Microfabricated Valves and Pumps by Multilayer Soft LithographyScience, 2000
- Rapid Prototyping of Microfluidic Systems in Poly(dimethylsiloxane)Analytical Chemistry, 1998