Numerical simulation of deformation behavior of Al particles impacting on Al substrate and effect of surface oxide films on interfacial bonding in cold spraying
- 1 March 2007
- journal article
- Published by Elsevier BV in Applied Surface Science
- Vol. 253 (11), 5084-5091
- https://doi.org/10.1016/j.apsusc.2006.11.020
Abstract
In this study, a comprehensive examination of the deformation behavior of Al particles impacting on Al substrate was conducted by using the Arbitrary Lagrangian Eulerian (ALE) method to clarify the deposition characteristics of Al powder and the effect of surface oxide films in cold spraying. It was found that the deformation behaviorof Al particles is different from that of Cu particles under the same impact conditions owing to its lower density and thus less kinetic energy upon impact. The results indicated that a higher velocity was required for Al particles to reach the same compression ratio as that of Cu particles. On the other hand, the numerical results showed that the oxide films at particle surfaces influenced the deformation and bonding condition between the particle and substrate. The inclusions of the crushed oxide films at the interfaces between the depostied particles inhibit the deformation. # 2006 Elsevier B.V. All rights reserved.Keywords
This publication has 18 references indexed in Scilit:
- Synthesis and mechanical properties of nanocrystalline Ni coatings produced by cold gas dynamic sprayingSurface and Coatings Technology, 2006
- Development of a generalized parameter window for cold spray depositionActa Materialia, 2005
- Transmission electron microscopy of cold sprayed 1100 aluminum coatingScripta Materialia, 2005
- Formation of metastable phases in cold-sprayed soft metallic depositSurface and Coatings Technology, 2005
- Superhard nano WC–12%Co coating by cold spray depositionMaterials Science and Engineering: A, 2005
- Adiabatic shear instability based mechanism for particles/substrate bonding in the cold-gas dynamic-spray processMaterials & Design (1980-2015), 2004
- Computational analysis of the interfacial bonding between feed-powder particles and the substrate in the cold-gas dynamic-spray processApplied Surface Science, 2003
- Analysis of cold gas dynamically sprayed aluminium depositsMaterials Letters, 2003
- Aluminum coatings via kinetic spray with relatively large powder particlesSurface and Coatings Technology, 2002
- Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressuresEngineering Fracture Mechanics, 1985