Laser Printing of Nanoparticle Toner Enables Digital Control of Micropatterned Carbon Nanotube Growth
- 25 February 2013
- journal article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 5 (9), 3656-3662
- https://doi.org/10.1021/am400148t
Abstract
Commercialization of materials utilizing patterned carbon nanotube (CNT) forests, such as hierarchical composite structures, dry adhesives, and contact probe arrays, will require catalyst patterning techniques that do not rely on cleanroom photolithography. We demonstrate the large scale patterning of CNT growth catalyst via adaptation of a laser-based electrostatic printing process that uses magnetic ink character recognition (MICR) toner. The MICR toner contains iron oxide nanoparticles that serve as the catalyst for CNT growth, which are printed onto a flexible polymer (polyimide) and then transferred to a rigid substrate (silicon or alumina) under heat and mechanical pressure. Then, the substrate is processed for CNT growth under an atmospheric pressure chemical vapor deposition (CVD) recipe. This process enables digital control of patterned CNT growth via the laser intensity, which controls the CNT density; and via the grayscale level, which controls the pixelation of the image into arrays of micropillars. Moreover, virtually any pattern can be designed using standard software (e.g., MS Word, AutoCAD, etc.) and printed on demand. Using a standard office printer, we realize isolated CNT microstructures as small as 140 μm and isolated catalyst ″pixels″ as small as 70 μm (one grayscale dot) and determine that individual toner microparticles result in features of approximately 5–10 μm . We demonstrate that grayscale CNT patterns can function as dry adhesives and that large-area catalyst patterns can be printed directly onto metal foils or transferred to ceramic plates. Laser printing therefore shows promise to enable high-speed micropatterning of nanoparticle-containing thin films under ambient conditions, possibly for a wide variety of nanostructures by engineering of toners containing nanoparticles of desired composition, size, and shape.Keywords
This publication has 24 references indexed in Scilit:
- Toner and paper‐based fabrication techniques for microfluidic applicationsElectrophoresis, 2010
- Inkjet Printing of Functional and Structural Materials: Fluid Property Requirements, Feature Stability, and ResolutionAnnual Review of Materials Research, 2010
- Inkjet Printing of Catalyst-Inks on Si Wafers and the Subsequent Synthesis of Carbon Nanotubes by Chemical Vapour DepositionKey Engineering Materials, 2010
- Carbon Nanotube Arrays with Strong Shear Binding-On and Easy Normal Lifting-OffScience, 2008
- Joining prepreg composite interfaces with aligned carbon nanotubesComposites Part A: Applied Science and Manufacturing, 2008
- Nanoimprint lithography: An old story in modern times? A reviewJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, 2008
- A toner-mediated lithographic technology for rapid prototyping of glass microchannelsLab on a Chip, 2007
- Patterned Paper as a Platform for Inexpensive, Low‐Volume, Portable BioassaysAngewandte Chemie-International Edition, 2007
- Rapid Growth and Flow-Mediated Nucleation of Millimeter-Scale Aligned Carbon Nanotube Structures from a Thin-Film CatalystThe Journal of Physical Chemistry B, 2006
- Printing nanoparticles from the liquid and gas phases using nanoxerographyNanotechnology, 2003