Effects of electrolyte, catalyst, and membrane composition and operating conditions on the performance of solar-driven electrochemical reduction of carbon dioxide
- 12 June 2015
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 17 (29), 18924-18936
- https://doi.org/10.1039/c5cp03283k
Abstract
Solar-driven electrochemical cells can be used to convert carbon dioxide, water, and sunlight into transportation fuels or into precursors to such fuels. The voltage efficiency of such devices depends on the (i) physical properties of its components (catalysts, electrolyte, and membrane); (ii) operating conditions (carbon dioxide flowrate and pressure, current density); and (iii) physical dimensions of the cell. The sources of energy loss in a carbon dioxide reduction (CO2R) cell are the anode and cathode overpotentials, the difference in pH between the anode and cathode, the difference in the partial pressure of carbon dioxide between the bulk electrolyte and the cathode, the ohmic loss across the electrolyte and the diffusional resistances across the boundary layers near the electrodes. In this study, we analyze the effects of these losses and propose optimal device configurations for the efficient operation of a CO2R electrochemical cell operating at a current density of 10 mA cm−2. Cell operation at near-neutral bulk pH offers not only lower polarization losses but also better selectivity to CO2R versus hydrogen evolution. Addition of supporting electrolyte to increase its conductivity has a negative impact on cell performance because it reduces the electric field and the solubility of CO2. Addition of a pH buffer reduces the polarization losses but may affect catalyst selectivity. The carbon dioxide flowrate and partial pressure can have severe effects on the cell efficiency if the carbon dioxide supply rate falls below the consumption rate. The overall potential losses can be reduced by use of an anion, rather than a cation, exchange membrane. We also show that the maximum polarization losses occur for the electrochemical synthesis of CO and that such losses are lower for the synthesis of products requiring a larger number of electrons per molecule, assuming a fixed current density. We also find that the reported electrocatalytic activity of copper below −1 V vs. RHE is strongly influenced by excessive polarization of the cathode and, hence, does not represent its true activity at bulk conditions. This article provides useful guidelines for minimizing polarization losses in solar-driven CO2R electrochemical cells and a method for predicting polarization losses and obtaining kinetic overpotentials from measured partial current densities.Keywords
Funding Information
- Basic Energy Sciences (DE-SC0004993)
This publication has 28 references indexed in Scilit:
- Identification of Highly Active Fe Sites in (Ni,Fe)OOH for Electrocatalytic Water SplittingJournal of the American Chemical Society, 2015
- Electrocatalytic Conversion of Carbon Dioxide to Methane and Methanol on Transition Metal SurfacesJournal of the American Chemical Society, 2014
- An experimental and modeling/simulation-based evaluation of the efficiency and operational performance characteristics of an integrated, membrane-free, neutral pH solar-driven water-splitting systemEnergy & Environmental Science, 2014
- Design of Membrane-Encapsulated Wireless Photoelectrochemical Cells for Hydrogen ProductionJournal of the Electrochemical Society, 2014
- Benchmarking Heterogeneous Electrocatalysts for the Oxygen Evolution ReactionJournal of the American Chemical Society, 2013
- New insights into the electrochemical reduction of carbon dioxide on metallic copper surfacesEnergy & Environmental Science, 2012
- Universality in Oxygen Evolution Electrocatalysis on Oxide SurfacesChemCatChem, 2011
- Mathematical Modeling of CO[sub 2] Reduction to CO in Aqueous ElectrolytesJournal of the Electrochemical Society, 2010
- A review of the aqueous electrochemical reduction of CO2 to hydrocarbons at copperJournal of Electroanalytical Chemistry, 2006
- Calculation for the cathode surface concentrations in the electrochemical reduction of CO2 in KHCO3 solutionsJournal of Applied Electrochemistry, 2005