Biomechanical Evaluation of Anterior and Posterior Fixations in an Unstable Calf Spine Model
- 1 February 1997
- journal article
- Published by Ovid Technologies (Wolters Kluwer Health) in Spine
- Vol. 22 (3), 261-266
- https://doi.org/10.1097/00007632-199702010-00005
Abstract
Fresh calf lumbar spines were used to perform flexibility tests in multiple loading directions to compare the stabilizing effects of anterior and posterior rigid instrumentations. To compare the biomechanical flexibility of anterior and posterior instrumentation constructs using an unstable calf spine model. Unstable burst fractures of the thoracolumbar spine can be managed anteriorly or posteriorly. Controversy persists, however, on the merit of anterior fixation versus that of posterior fixation in terms of how much stability can be achieved. Fifteen fresh calf spines (L2-L5) were loaded with pure unconstrained moments in flexion, extension, axial rotation, and lateral bending directions. After removal of L3-L4 disc and endplates to create an 1.5-cm anterior and middle column defect, testing was performed on five specimens after anterior Kaneda rod fixation, anterior University Plate fixation, or posterior ISOLA pedicle screw fixation (AcroMed, Cleveland, OH). Testing was repeated after inserting a polymethylmethacrylate block to stimulate an interbody anterior graft with instrumentation. All fixation devices provided a significant stabilizing effect in flexion and lateral bending. In extension, all constructs except ISOLA (AcroMed) without graft were stiffer than the intact specimen. In axial rotation with no graft, only the Kaneda device significantly reduced the flexibility from that of the intact specimen. The interbody graft provided additional rigidity to the ISOLA (AcroMed) instrumentation construct in flexion and extension and to the Kaneda construct in lateral bending. There was no significant effect of grafting in axial rotation. A short, transpedicular instrumentation, such as ISOLA (AcroMed), provided less rigid fixation in flexion and extension without the anterior structural graft. The Kaneda rod and University plate with grafting provided a significant stabilizing effect in all directions compared with the intact specimen. When no graft was inserted, the Kaneda device was more effective in preventing axial rotation than the other devices. In lateral bending, the University plate provided more rigid fixation than the Kaneda device without grafting.Keywords
This publication has 19 references indexed in Scilit:
- Biomechanical Evaluation of Anterior Thoracolumbar Spinal InstrumentationSpine, 1995
- Anterior Spinal FixatorsSpine, 1993
- Importance of Bone Mineral Density in Instrumented Spine FusionsSpine, 1991
- The Syracuse I-PlateSpine, 1991
- Anterior Decompression and Stabilization of Thoracolumbar Burst Fractures by the Use of the Slot–Zielke DeviceSpine, 1991
- Influence of Bone Mineral Density on the Fixation of Thoracolumbar Implants A Comparative Study of Transpedicular Screws, Laminar Hooks, and Spinous Process WiresSpine, 1990
- Anterior Fixation for Burst Fractures of the Thoracic and Lumbar Spine with or without Neurological InvolvementSpine, 1988
- Early Clinical Experience with the Syracuse I-Plate: An Anterior Spinal Fixation DeviceSpine, 1988
- A Technique to Evaluate an Internal Spinal Device by Use of the Selspot System: An Application to Luque Closed LoopSpine, 1987
- Burst Fractures with Neurologic Deficits of the Thoracolumbar-Lumbar Spine Results of Anterior Decompression and Stabilization with Anterior InstrumentationSpine, 1984