Lubrication mechanisms with laser-surface-textured surfaces in elastohydrodynamic regime
- 14 May 2010
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Vol. 224 (8), 697-711
- https://doi.org/10.1243/13506501jet771
Abstract
Micro-texturing is very efficient to make surfaces super-hydrophobic according to a physical process known as ‘lotus effect’. In the recent past, tribologists have also investigated surface texturing because it could be a promising way to increase the lifetime of contacts or to make its working conditions more severe. Moreover, significant friction coefficient reductions have been obtained with textured surfaces in different lubrication regimes. In this presentation, transient lubrication phenomena induced by laser-made circular dimples passing through an elastohydrodynamic lubrication point contact are analysed both experimentally and numerically. Under rolling—sliding conditions, the passage of an isolated dimple modifies the film thickness distribution. Deep dimples induce an oil film failure. On the contrary, a shallow dimple locally generates a large increase in the film thickness. Dimples geometry and the slide/roll ratio modify the pressure distribution and then control the level and extension of the local film reinforcement. Experiments are simulated numerically with a two-dimensional multi-grid solver. This allows one to have a better understanding of the lubrication mechanism with a textured surface as a function of dimple geometry, entrainment speed, and contact pressure. The key point is the control of tribological conditions to maintain the viscosity of the lubricant high enough inside the dimple in order that the shearing can expel it to locally enhance the film thickness.Keywords
This publication has 37 references indexed in Scilit:
- Influence of a Surface Bump or Groove on the Lubricating Performance and Dimple Phenomena in Simple Sliding Point EHL ContactsJournal of Tribology, 2004
- Surface roughness attenuation in line and point contactsProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2000
- Analytical and Experimental Investigation of Laser-Textured Mechanical Seal FacesTribology Transactions, 1999
- Waviness Amplitude Reduction in EHL Line Contacts Under Rolling-SlidingJournal of Tribology, 1998
- Abnormal Phenomena Appearing in EHL ContactsJournal of Tribology, 1996
- Numerical Simulation of a Transverse Ridge in a Circular EHL Contact Under Rolling/SlidingJournal of Tribology, 1994
- Transient Analysis of Surface Features in an EHL Line Contact in the Case of SlidingJournal of Tribology, 1994
- Numerical Simulation of the Overrolling of a Surface Feature in an EHL Line ContactJournal of Tribology, 1991
- Boundary Lubrication of Undulated Metal Surfaces at Elevated TemperaturesTribology Transactions, 1989
- Boundary Lubrication Studies on Undulated Titanium SurfacesTribology Transactions, 1989