ENVIRONMENTAL APPLICATION OF MINERAL SULFIDES FOR REMOVAL OF GAS-PHASE HG(0) AND AQUEOUS HG2+
- 30 June 2001
- journal article
- Published by Informa UK Limited in Separation Science and Technology
- Vol. 36 (5-6), 1183-1196
- https://doi.org/10.1081/ss-100103644
Abstract
Synthesized and commercially available metal sulfides were evaluated for their ability to adsorb elemental and ionic mercury. The coinage group metal sulfides adsorb elemental Hg(0) vapor stoichiometrically. The mechanism of Hg(0) uptake by the copper and gold sulfides is a redox process resulting in the formation of HgS. The mechanism in the case of Ag2S involves redox but there is no HgS formation. The relative rates of Hg(0) adsorption increases in the order CuS > Ag2S > Au2S > Au2S3 corresponding to the metal ion reduction potentials. The relative rate of Hg(0) adsorption for commercial grade CuS is increased by an activation process which involves making a slurry of the metal sulfide in concentrated oxalic acid followed by drying and then exposure to Hg(0). Relative rates of Hg(0) adsorption were also increased by decreasing the particle size of the metal sulfides. Particle sizes were decreased by synthesis of the metal sulfide in the presence of the particle-size mediating agent CTAB. The metal sulfides remove ionic mercury from acidic solutions by precipitation with the dissolved sulfide forming HgS. In acidic solution there was no evidence of physical or chemical adsorption between Hg(0) and the metal sulfide. The quantity of ionic Hg2+ removal from aqueous solutions is correlated with the solubility of the metal sulfide. Cu2S was the most soluble metal sulfide tested and thus removed the most ionic mercury from solution by precipitating HgS.Keywords
This publication has 6 references indexed in Scilit:
- A review of potentially low-cost sorbents for heavy metalsWater Research, 1999
- Efficient Recovery of Elemental Mercury from Hg(II)-Contaminated Aqueous Media Using a Redox-Recyclable Ion-Exchange MaterialEnvironmental Science & Technology, 1998
- Hybrid Mesoporous Materials with Functionalized MonolayersAdvanced Materials, 1998
- Uptake of Elemental Mercury Vapors by Activated CarbonsJournal of the Air & Waste Management Association, 1996
- Development of a sorbent-based technology for control of mercury in flue gasPublished by Office of Scientific and Technical Information (OSTI) ,1996
- Mercury Removal from Oil by Reactive AdsorptionIndustrial & Engineering Chemistry Research, 1996