A Polymer-Based Capacitive Sensing Array for Normal and Shear Force Measurement
Open Access
- 15 November 2010
- Vol. 10 (11), 10211-10225
- https://doi.org/10.3390/s101110211
Abstract
In this work, we present the development of a polymer-based capacitive sensing array. The proposed device is capable of measuring normal and shear forces, and can be easily realized by using micromachining techniques and flexible printed circuit board (FPCB) technologies. The sensing array consists of a polydimethlysiloxane (PDMS) structure and a FPCB. Each shear sensing element comprises four capacitive sensing cells arranged in a 2 × 2 array, and each capacitive sensing cell has two sensing electrodes and a common floating electrode. The sensing electrodes as well as the metal interconnect for signal scanning are implemented on the FPCB, while the floating electrodes are patterned on the PDMS structure. This design can effectively reduce the complexity of the capacitive structures, and thus makes the device highly manufacturable. The characteristics of the devices with different dimensions were measured and discussed. A scanning circuit was also designed and implemented. The measured maximum sensitivity is 1.67%/mN. The minimum resolvable force is 26 mN measured by the scanning circuit. The capacitance distributions induced by normal and shear forces were also successfully captured by the sensing array.Keywords
This publication has 18 references indexed in Scilit:
- Capacitive Micro Pressure Sensor Integrated with a Ring Oscillator Circuit on ChipSensors, 2009
- Fabrication of Wireless Micro Pressure Sensor Using the CMOS ProcessSensors, 2009
- Fabrication and Performance of MEMS-Based Pressure Sensor Packages Using Patterned Ultra-Thick PhotoresistsSensors, 2009
- Artificial Roughness Encoding with a Bio-inspired MEMS-based Tactile Sensor ArraySensors, 2009
- Flexible Electronics Sensors for Tactile Multi-TouchingSensors, 2009
- Tuning the sensing range and sensitivity of three axes tactile sensors using the polymer composite membraneSensors and Actuators A: Physical, 2008
- Fabrication of a wearable fabric tactile sensor produced by artificial hollow fiberJournal of Micromechanics and Microengineering, 2008
- Texture classification using a polymer-based MEMS tactile sensorJournal of Micromechanics and Microengineering, 2005
- Development of polyimide flexible tactile sensor skinJournal of Micromechanics and Microengineering, 2003
- A flexible micromachine-based shear-stress sensor array and its application to separation-point detectionSensors and Actuators A: Physical, 2000