Generation of a ground-level DEM in a dense equatorial forest zone by merging airborne laser data and a top-of-canopy DEM
- 1 December 2004
- journal article
- Published by Informa UK Limited in Canadian Journal of Remote Sensing
- Vol. 30 (6), 913-926
- https://doi.org/10.5589/m04-049
Abstract
(i) selecting ground points from the airborne data and deducing a pseudo canopy height for these points, (ii) characterizing the canopy height from a statistical and geostatistical standpoint, (iii) kriging the canopy height and subtracting the resulting model from the top-of-canopy DEM to obtain a DEM corresponding to a ground-level DEM, and (iv) validation. Validation consists of comparing the results with topographic maps and a local heliborne DEM and studying the relationship between the configuration of the airborne trials, in terms of flight-line spacing, and accuracy of the resulting kriged DEM. The results show that the accuracy of the kriged ground-level DEM is significantly better than that of the initial radargrammetric DEM. The standard deviation of elevation errors is reduced from 21.2 to 11.9 m or from 25.3 to 11.1 m, depending on the validation source adopted (French National Geographic Institute spot heights and local heliborne DEM, respectively). In addition, the relationship between flight-line spacing and accuracy of the resulting kriged DEM helps estimate what flight-line spacing is needed to obtain a given accuracy.Keywords
This publication has 4 references indexed in Scilit:
- Accuracy of a high-resolution lidar terrain model under a conifer forest canopyCanadian Journal of Remote Sensing, 2003
- ICESat's laser measurements of polar ice, atmosphere, ocean, and landJournal of Geodynamics, 2002
- State-of-the-art of elevation extraction from satellite SAR dataISPRS Journal of Photogrammetry and Remote Sensing, 2000
- Error tracking of radargrammetric DEM from RADARSAT imagesIEEE Transactions on Geoscience and Remote Sensing, 1999