Kinetic model of a granular sludge SBR: Influences on nutrient removal
- 24 May 2007
- journal article
- research article
- Published by Wiley in Biotechnology & Bioengineering
- Vol. 97 (4), 801-815
- https://doi.org/10.1002/bit.21196
Abstract
A mathematical model was developed that can be used to describe an aerobic granular sludge reactor, fed with a defined influent, capable of simultaneously removing COD, nitrogen and phosphate in one sequencing batch reactor (SBR). The model described the experimental data from this complex system sufficiently. The effect of process parameters on the nutrient removal rates could therefore be reliably evaluated. The influence of oxygen concentration, temperature, granule diameter, sludge loading rate, and cycle configuration were analyzed. Oxygen penetration depth in combination with the position of the autotrophic biomass played a crucial role in the conversion rates of the different components and thus on overall nutrient removal efficiencies. The ratio between aerobic and anoxic volume in the granule strongly determines the N-removal efficiency as it was shown by model simulations with varying oxygen concentration, temperature, and granule size. The optimum granule diameter for maximum N- and P-removal in the standard case operating conditions (DO 2 mg L−1, 20°C) was found between 1.2 and 1.4 mm and the optimum COD loading rate was 1.9 kg COD m−3 day−1. When all ammonia is oxidized, oxygen diffuses to the core of the granule inhibiting the denitrification process. In order to optimize the process, anoxic phases can be implemented in the SBR-cycle configuration, leading to a more efficient overall N-removal. Phosphate removal efficiency mainly depends on the sludge age; if the SRT exceeds 30 days not enough biomass is removed from the system to keep effluent phosphate concentrations low. Biotechnol. Bioeng. 2007;97: 801–815.Keywords
This publication has 24 references indexed in Scilit:
- Formation of aerobic granules and conversion processes in an aerobic granular sludge reactor at moderate and low temperaturesWater Research, 2005
- Simultaneous COD, nitrogen, and phosphate removal by aerobic granular sludgeBiotechnology & Bioengineering, 2005
- Aerobic granular sludge technology: an alternative to activated sludge?Water Science & Technology, 2004
- Selection of slow growing organisms as a means for improving aerobic granular sludge stabilityWater Science & Technology, 2004
- Conventional Morphological and Functional Evaluation of the Microbial Populations in a Sequencing Batch Reactor Performing EBPRJournal of Environmental Science and Health, Part A, 2003
- Model-based evaluation of temperature and inflow variations on a partial nitrification–ANAMMOX biofilm processWater Research, 2002
- N‐Removal in a granular sludge sequencing batch airlift reactorBiotechnology & Bioengineering, 2001
- Generation and properties of aerobic granular sludgeWater Science & Technology, 2001
- Model-Based Evaluation of Denitrifying P Removal in a Two-Sludge SystemJournal of Environmental Engineering, 2001
- Aerobic granulation in a sequencing batch reactorWater Research, 1999