Comparative performance of 5 cm2 and 10 cm2 piezocones in a lacustrine clay
- 1 August 2006
- journal article
- Published by Thomas Telford Ltd. in Géotechnique
- Vol. 56 (6), 427-438
- https://doi.org/10.1680/geot.2006.56.6.427
Abstract
A piezocone investigation has been carried out in a deep deposit of glacial lacustrine clay using piezocones with cross-sectional areas of 5 cm2 and 10 cm2. The piezocone tests formed part of a larger soil characterisation study, but this paper focuses on the relative performance of the piezocones in profiling the clay. It is shown that using a 5 cm2 piezocone rather than a 10 cm2 one significantly improved the detection of relatively thin silt layers within the lacustrine, and occasionally varved, clay. The feasibility of detecting silt layers as thin as 2–4 mm and of matching the piezocone responses associated with silt layers at different test locations, thereby allowing an assessment of their continuity, is demonstrated. There were no significant differences between the magnitudes of the cone resistance and excess pore pressure recorded in the clay with 5 cm2 and 10 cm2 piezocones. Pore pressure dissipation test results were variable but, in a region where no silt layers were detected, similar results were obtained with piezocones of each size.Keywords
This publication has 6 references indexed in Scilit:
- Coefficient of consolidation from piezocone measurementsGéotechnique, 2005
- Offshore site investigationsPublished by Informa UK Limited ,2005
- Performance of miniature piezocones in thinly layered soilsGéotechnique, 2003
- Interpretation of cone penetration results in multilayered soilsInternational Journal for Numerical and Analytical Methods in Geomechanics, 1994
- An analytical study of the cone penetration test in clayGéotechnique, 1991
- Overconsolidation in Soft Clay DepositsGéotechnique, 1970