Laboratory Observations of Fault Strength in Response to Changes in Normal Stress
- 5 April 2012
- journal article
- Published by ASME International in Journal of Applied Mechanics
- Vol. 79 (3), 031007
- https://doi.org/10.1115/1.4005883
Abstract
Changes in fault normal stress can either inhibit or promote rupture propagation, depending on the fault geometry and on how fault shear strength varies in response to the normal stress change. A better understanding of this dependence will lead to improved earthquake simulation techniques, and ultimately, improved earthquake hazard mitigation efforts. We present the results of new laboratory experiments investigating the effects of step changes in fault normal stress on the fault shear strength during sliding, using bare Westerly granite samples, with roughened sliding surfaces, in a double direct shear apparatus. Previous experimental studies examining the shear strength following a step change in the normal stress produce contradictory results: a set of double direct shear experiments indicates that the shear strength of a fault responds immediately, and then is followed by a prolonged slip-dependent response, while a set of shock loading experiments indicates that there is no immediate component, and the response is purely gradual and slip-dependent. In our new, high-resolution experiments, we observe that the acoustic transmissivity and dilatancy of simulated faults in our tests respond immediately to changes in the normal stress, consistent with the interpretations of previous investigations, and verify an immediate increase in the area of contact between the roughened sliding surfaces as normal stress increases. However, the shear strength of the fault does not immediately increase, indicating that the new area of contact between the rough fault surfaces does not appear preloaded with any shear resistance or strength. Additional slip is required for the fault to achieve a new shear strength appropriate for its new loading conditions, consistent with previous observations made during shock loading.Keywords
This publication has 22 references indexed in Scilit:
- Monitoring frictional strength with acoustic wave transmissionGeophysical Research Letters, 2008
- Material contrast does not predict earthquake rupture propagation directionGeophysical Research Letters, 2005
- The Dynamics of Strike-Slip Step-Overs with Linking Dip-Slip FaultsBulletin of the Seismological Society of America, 2005
- Effects of normal stress perturbations on the frictional properties of simulated faultsGeochemistry, Geophysics, Geosystems, 2005
- Dynamic Slip Transfer from the Denali to Totschunda Faults, Alaska: Testing Theory for Fault BranchingBulletin of the Seismological Society of America, 2004
- Effects of prestress state and rupture velocity on dynamic fault branchingJournal of Geophysical Research, 2003
- Rate and state dependent friction and the stability of sliding between elastically deformable solidsJournal of the Mechanics and Physics of Solids, 2001
- Frictional Response of Sliding Interfaces Subjected to Time Varying Normal PressuresJournal of Tribology, 1998
- Fault steps and the dynamic rupture process: 2‐D numerical simulations of a spontaneously propagating shear fractureGeophysical Research Letters, 1991
- The Friction and Lubrication of SolidsAmerican Journal of Physics, 1951