How Permeability Depends on Stress and Pore Pressure in Coalbeds: A New Model
- 1 December 1998
- journal article
- Published by Society of Petroleum Engineers (SPE) in SPE Reservoir Evaluation & Engineering
- Vol. 1 (06), 539-544
- https://doi.org/10.2118/52607-pa
Abstract
Summary: In naturally fractured formations such as coal, permeability is sensitive to changes in stress or pore pressure (i.e., changes in effective stress). This paper presents a new theoretical model for calculating pore volume (PV) compressibility and permeability in coals as a function of effective stress and matrix shrinkage, by means of a single equation. The equation is appropriate for uniaxial strain conditions, as expected in a reservoir. The model predicts how permeability changes as pressure is decreased (i.e., drawdown). PV compressibility is derived in this theory from fundamental reservoir parameters. It is not constant, as often assumed. PV compressibility is high in coals because porosity is so small. A rebound in permeability can occur at lower drawdown pressures for the highest modulus and matrix shrinkage values. We have also history matched rates from a boomer well in the fairway of the San Juan basin by use of various stress-dependent permeability functions. The best fit stress/permeability function is then compared with the new theory.Keywords
This publication has 3 references indexed in Scilit:
- Experimental Measurement of Coal Matrix Shrinkage Due to Gas Desorption and Implications for Cleat Permeability IncreasesPublished by Society of Petroleum Engineers (SPE) ,1995
- Application of Matchstick Geometry To Stress Dependent Permeability in CoalsPublished by Society of Petroleum Engineers (SPE) ,1992
- Influence of Matrix Shrinkage and Compressibility on Gas Production From Coalbed Methane ReservoirsPublished by Society of Petroleum Engineers (SPE) ,1990