A radio-over-fiber network for microcellular system application

Abstract

This paper investigates the feasibility of a radio-over-fiber network, which employs a single high-power Nd:YAG laser shared among many microcells. External amplitude modulators are employed at both base station (BS) and radio ports (RPs) to form an optical fiber distribution network. The distortions induced by the uplink remodulation are analyzed. The optimal preamplifier gain in the uplink is estimated for given sensitivity and dynamic range (DR). Appropriate modulator linearization and thermal-noise suppression schemes are utilized together to improve the DR. The clipping distortion for the predistortion-linearized modulator is also considered. The result shows that the effects of clipping and higher order distortions have little impact on the estimation of the system performance. A numerical example shows that a 100-mW Nd:YAG laser can provide for a macrocell of 5-km radius up to 16 microcells and 1600 channels when a 20-dB modulator linearization and 10-dB thermal-noise suppression are employed. The experiment setup uses a two-tone test to verify the theoretical calculation. The measurement agrees with the theoretical estimation very well