Passive Extraction of Dynamic Transfer Function From Arbitrary Ambient Excitations: Application to High-Speed Rail Inspection From Wheel-Generated Waves
Open Access
- 14 September 2017
- journal article
- Published by ASME International in Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems
- Vol. 1 (1), 011005
- https://doi.org/10.1115/1.4037517
Abstract
The general topic of this paper is the passive reconstruction of an acoustic transfer function from an unknown, generally nonstationary excitation. As recently shown in a study of building response to ground shaking, the paper demonstrates that, for a linear system subjected to an unknown excitation, the deconvolution operation between two receptions leads to the Green's function between the two reception points that is independent of the excitation. This is in contrast to the commonly used cross-correlation operation for passive reconstruction of the Green's function, where the result is always filtered by the source energy spectrum (unless it is opportunely normalized in a manner that makes it equivalent to a deconvolution). This concept is then applied to high-speed ultrasonic inspection of rails by passively reconstructing the rail's transfer function from the excitations naturally caused by the rolling wheels of a moving train. A first-generation prototype based on this idea was engineered using noncontact air-coupled sensors, mounted underneath a test railcar, and field tested at speeds up to 80 mph at the Transportation Technology Center (TTC), Pueblo, CO. This is the first demonstration of passive inspection of rails from train wheel excitations and, to the authors' knowledge, the first attempt ever made to ultrasonically inspect the rail at speeds above ∼30 mph (that is the maximum speed of common rail ultrasonic inspection vehicles). Once fully developed, this novel concept could enable regular trains to perform the inspections without any traffic disruption and with great redundancy.Keywords
This publication has 40 references indexed in Scilit:
- Passive-only damage detection by reciprocity of Green’s functions reconstructed from diffuse acoustic fields with application to wind turbine bladesJournal of Intelligent Material Systems and Structures, 2014
- Structural health monitoring by extraction of coherent guided waves from diffuse fieldsThe Journal of the Acoustical Society of America, 2007
- On estimating the impulse response between receivers in a controlled ultrasonic experimentGeophysics, 2006
- Passive correlation imaging of a buried scattererThe Journal of the Acoustical Society of America, 2006
- Detection of structural damage from the local temporal coherence of diffuse ultrasonic signalsIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2005
- Emergence rate of the time-domain Green’s function from the ambient noise cross-correlation functionThe Journal of the Acoustical Society of America, 2005
- Ambient noise cross correlation in free space: Theoretical approachThe Journal of the Acoustical Society of America, 2005
- Diffuse fields in open systems and the emergence of the Green’s function (L)The Journal of the Acoustical Society of America, 2004
- Extracting the Green’s function from the correlation of coda waves: A derivation based on stationary phasePhysical Review E, 2004
- On the emergence of the Green’s function in the correlations of a diffuse fieldThe Journal of the Acoustical Society of America, 2001