Ultrafine Particles Emitted by Flame and Electric Arc Guns for Thermal Spraying of Metals
Open Access
- 1 August 2010
- journal article
- review article
- Published by Oxford University Press (OUP) in Annals of Occupational Hygiene
- Vol. 54 (6), 607-614
- https://doi.org/10.1093/annhyg/meq052
Abstract
The ultrafine aerosol emitted by thermal spraying of metals using flame and electric arc processes has been characterized in terms of particle size distribution and emission rates based on both particle number and mass. Thermal spraying of Zn, Zn/Al, and Al was studied. Measurements taken using an electrical low pressure impactor and a condensation nucleus counter reveal an aerosol made up of very fine particles (80–95% of number distribution <100 nm). Ultrafine particle emission rates produced by the electric arc process are very high, the largest values being recorded during spraying of pure aluminium. This process generates high particle emissions and therefore requires careful consideration and possible rethinking of currently implemented protection measures: ventilated cabins, dust collectors, and personal protective equipment.Keywords
This publication has 7 references indexed in Scilit:
- Size-dependent toxicity of metal oxide particles—A comparison between nano- and micrometer sizeToxicology Letters, 2009
- Ultrafine and Respirable Particles in an Automotive Grey Iron FoundryAnnals of Occupational Hygiene, 2007
- Ultrafine particles at workplaces of a primary aluminium smelterJournal of Environmental Monitoring, 2005
- Measuring diesel soot with a scanning mobility particle sizer and an electrical low-pressure impactor: performance assessment with a model for fractal-like agglomeratesJournal of Aerosol Science, 2004
- Particle Morphology and Density Characterization by Combined Mobility and Aerodynamic Diameter Measurements. Part 1: TheoryAerosol Science and Technology, 2004
- Comparisons of aerosol properties measured by impactors and light scattering from individual particles: refractive index, number and volume concentrations, and size distributionsAtmospheric Environment, 2002
- An investigation of occupational metal exposure in thermal spraying processesScience of The Total Environment, 1997