Triboelectric nanogenerators as new energy technology and self-powered sensors – Principles, problems and perspectives
Top Cited Papers
- 8 September 2014
- journal article
- perspective
- Published by Royal Society of Chemistry (RSC) in Faraday Discussions
- Vol. 176, 447-458
- https://doi.org/10.1039/c4fd00159a
Abstract
Triboelectrification is one of the most common effects in our daily life, but it is usually taken as a negative effect with very limited positive applications. Here, we invented a triboelectric nanogenerator (TENG) based on organic materials that is used to convert mechanical energy into electricity. The TENG is based on the conjunction of triboelectrification and electrostatic induction, and it utilizes the most common materials available in our daily life, such as papers, fabrics, PTFE, PDMS, Al, PVCetc.In this short review, we first introduce the four most fundamental modes of TENG, based on which a range of applications have been demonstrated. The area power density reaches 1200 W m−2, volume density reaches 490 kW m−3, and an energy conversion efficiency of ∼50–85% has been demonstrated. The TENG can be applied to harvest all kinds of mechanical energy that is available in our daily life, such as human motion, walking, vibration, mechanical triggering, rotation energy, wind, a moving automobile, flowing water, rain drops, tide and ocean waves. Therefore, it is a new paradigm for energy harvesting. Furthermore, TENG can be a sensor that directly converts a mechanical triggering into a self-generated electric signal for detection of motion, vibration, mechanical stimuli, physical touching, and biological movement. After a summary of TENG for micro-scale energy harvesting, mega-scale energy harvesting, and self-powered systems, we will present a set of questions that need to be discussed and explored for applications of the TENG. Lastly, since the energy conversion efficiencies for each mode can be different although the materials are the same, depending on the triggering conditions and design geometry. But one common factor that determines the performance of all the TENGs is the charge density on the two surfaces, the saturation value of which may independent of the triggering configurations of the TENG. Therefore, the triboelectric charge density or the relative charge density in reference to a standard material (such as polytetrafluoroethylene (PTFE)) can be taken as a measuring matrix for characterizing the performance of the material for the TENG.Keywords
This publication has 58 references indexed in Scilit:
- Single-Electrode-Based Sliding Triboelectric Nanogenerator for Self-Powered Displacement Vector Sensor SystemACS Nano, 2013
- Simultaneously harvesting mechanical and chemical energies by a hybrid cell for self-powered biosensors and personal electronicsEnergy & Environmental Science, 2013
- A Self‐Powered Triboelectric Nanosensor for Mercury Ion DetectionAngewandte Chemie, 2013
- Frequency-Multiplication High-Output Triboelectric Nanogenerator for Sustainably Powering Biomedical MicrosystemsNano Letters, 2013
- Hybrid Energy Cell for Degradation of Methyl Orange by Self-Powered Electrocatalytic OxidationNano Letters, 2013
- Nanoscale Triboelectric-Effect-Enabled Energy Conversion for Sustainably Powering Portable ElectronicsNano Letters, 2012
- Nanotechnology‐Enabled Energy Harvesting for Self‐Powered Micro‐/NanosystemsAngewandte Chemie, 2012
- Triboelectric-Generator-Driven Pulse Electrodeposition for MicropatterningNano Letters, 2012
- Flexible triboelectric generatorNano Energy, 2012
- Self-Powered NanotechScientific American, 2008