Disruption of extended defects in solid oxide fuel cell anodes for methane oxidation
- 1 February 2006
- journal article
- letter
- Published by Springer Science and Business Media LLC in Nature
- Vol. 439 (7076), 568-571
- https://doi.org/10.1038/nature04438
Abstract
Point defects largely govern the electrochemical properties of oxides: at low defect concentrations, conductivity increases with concentration; however, at higher concentrations, defect–defect interactions start to dominate1,2. Thus, in searching for electrochemically active materials for fuel cell anodes, high defect concentration is generally avoided. Here we describe an oxide anode formed from lanthanum-substituted strontium titanate (La-SrTiO3) in which we control the oxygen stoichiometry in order to break down the extended defect intergrowth regions and create phases with considerable disordered oxygen defects. We substitute Ti in these phases with Ga and Mn to induce redox activity and allow more flexible coordination. The material demonstrates impressive fuel cell performance using wet hydrogen at 950 °C. It is also important for fuel cell technology to achieve efficient electrode operation with different hydrocarbon fuels3,4, although such fuels are more demanding than pure hydrogen. The best anode materials to date—Ni-YSZ (yttria-stabilized zirconia) cermets5—suffer some disadvantages related to low tolerance to sulphur6, carbon build-up when using hydrocarbon fuels7 (though device modifications and lower temperature operation can avoid this8,9) and volume instability on redox cycling. Our anode material is very active for methane oxidation at high temperatures, with open circuit voltages in excess of 1.2 V. The materials design concept that we use here could lead to devices that enable more-efficient energy extraction from fossil fuels and carbon-neutral fuels.Keywords
This publication has 20 references indexed in Scilit:
- Advanced anodes for high-temperature fuel cellsNature Materials, 2004
- A review on the status of anode materials for solid oxide fuel cellsMaterials Science and Engineering: A, 2003
- A redox-stable efficient anode for solid-oxide fuel cellsNature Materials, 2003
- Electrical properties in La2Sr4Ti6O19$minus;$delta;: a potential anode for high temperature fuel cellsSolid State Ionics, 2003
- Sr-Doped LaCrO[sub 3] Anode for Solid Oxide Fuel CellsJournal of the Electrochemical Society, 2001
- Structural studies on the optimisation of fast oxide ion transportSolid State Ionics, 2000
- The poisoning effect of sulfur-containing impurity gas on a SOFC anode: Part I. Dependence on temperature, time, and impurity concentrationSolid State Ionics, 2000
- Direct oxidation of hydrocarbons in a solid-oxide fuel cellNature, 2000
- A direct-methane fuel cell with a ceria-based anodeNature, 1999
- The Effect of Added Salts on the Stability of Cd‐Chalcogenide/Polysulfide Photoelectrochemical CellsJournal of the Electrochemical Society, 1982