Hydraulically interconnected vehicle suspension: handling performance
- 1 February 2011
- journal article
- research article
- Published by Informa UK Limited in Vehicle System Dynamics
- Vol. 49 (1-2), 87-106
- https://doi.org/10.1080/00423111003596743
Abstract
This paper extends recent research on vehicles with hydraulically interconnected suspension (HIS) systems. Such suspension schemes have received considerable attention in the research community over the last few years. This is due, in part, to their reported ability to provide stiffness and damping rates dependent on the suspension mode of operation (i.e. the bounce, roll, pitch or articulation of the unsprung masses relative to the sprung mass), rather than relying on the stiffness and damping characteristics of the single wheel stations. The paper uses a nine-degrees-of-freedom (DOF) vehicle model and simulations of a fishhook manoeuvre to assess the handling performance of a vehicle when it is fitted with: (a) a conventional independent suspension, and (b) an HIS. In the case of the latter, the fluid subsystem is modelled using a nonlinear finite-element approach, resulting in a set of coupled, first-order nonlinear differential equations, which describe the dynamics of the integrated mechanical-hydraulic vehicle system. The simulation results indicate that, in general, the HIS-equipped vehicle possesses superior handling, as measured by the sprung mass roll angle, roll rate, roll acceleration, lateral acceleration and the vehicle's Rollover Critical Factor. The potential effects of the suspension set-up on ride performance are also considered by studying the transient response when one side of the vehicle traverses a half-sine bump. The obtained results are then discussed, and it is shown that they are consistent with previous findings, both by the authors and other researchers. The presented work outlines an alternative approach for studying the dynamics of HIS-equipped vehicles, particularly suited to analyses in the time domain.Keywords
This publication has 12 references indexed in Scilit:
- Hydraulically interconnected vehicle suspension: background and modellingVehicle System Dynamics, 2010
- Experimental and Theoretical Investigation into the Dynamics of a Half-Car with an Interconnected Passive SuspensionPublished by SAE International ,2009
- Pitch plane analysis of a twin-gas-chamber strut suspensionProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2008
- Property Analysis of an X-Coupled Suspension for Sport Utility VehiclesSAE International Journal of Passenger Cars - Mechanical Systems, 2008
- Investigation into untripped rollover of light vehicles in the modified fishhook and the sine maneuvers. Part I: Vehicle modelling, roll and yaw instabilityVehicle System Dynamics, 2008
- Pitch Attitude Control and Braking Performance Analysis of Heavy Vehicle with Interconnected SuspensionsSAE International Journal of Advances and Current Practices in Mobility, 2007
- ADAMS Simulation of Ride and Handling Performance of the Kinetic™ Suspension SystemSAE International Journal of Advances and Current Practices in Mobility, 2006
- Comparison of Roll Properties of Hydraulically and Pneumatically Interconnected Suspensions for Heavy VehiclesSAE International Journal of Advances and Current Practices in Mobility, 2005
- Experimental Evaluation of Fishhook Maneuver Performance of a Kinetic Suspension SystemSAE International Journal of Advances and Current Practices in Mobility, 2005
- Interconnected vehicle suspensionProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2005