First Analysis of TerraSAR-X Along-Track InSAR-Derived Current Fields
- 30 October 2009
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 48 (2), 820-829
- https://doi.org/10.1109/tgrs.2009.2030885
Abstract
We present the first analysis of surface current fields derived from TerraSAR-X along-track interferometric synthetic aperture radar (along-track InSAR, ATI) data. The images were acquired over the mouth of the Elbe river (Germany) during six satellite overpasses in spring and summer 2008, using the experimental "aperture switching" mode of TerraSAR-X. In this mode, the phased-array synthetic aperture radar (SAR) antenna is split into two halves for receiving, but in contrast to the "dual receive antenna" mode, which uses two independent receivers in parallel, a single receiver is multiplexed to process signals from the two antenna halves in an alternating manner at a doubled pulse repetition frequency. The effective ATI baseline is on the order of 0.8 m. The SAR/ATI raw data processing is described in another paper in this issue. This paper focuses on the conversion of the basic interferograms into line-of-sight surface current fields, which includes an elimination of ship signatures, identification, and correction (as far as possible) of imaging artifacts, additional filtering and smoothing, and a subtraction of contributions of wave motions to detected velocities according to a theoretical model. We evaluate the quality of the results by comparison with current fields from a numerical flow model and with available in situ data. The ATI performance of TerraSAR-X is found to be basically consistent with theoretical expectations. After applying the same data processing algorithms to all six images, mean differences between TerraSAR-X-derived currents and reference currents in our main test area range from -0.11 to + 0.08 m/s in five of the six cases with one outlier at +0.42 m/s. The spatial current variations within the TerraSAR-X-derived current fields are consistent with the model in three cases, but unrealistically strong variations across the images are found in the other three cases. We attribute this to shortcomings of our preliminary raw data processing algorithms, which can probably be fixed after some more detailed analysis and testing. The results obtained so far encourage us to believe that our internal performance goal of a typical current measuring accuracy of 0.1 m/s at an effective spatial resolution better than 1 km can be met.Keywords
This publication has 15 references indexed in Scilit:
- Performance comparison of composite clock estimates for two types of modelsPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2012
- Automatic Extraction of Traffic Flows Using TerraSAR-X Along-Track InterferometryIEEE Transactions on Geoscience and Remote Sensing, 2010
- Current Measurements in Rivers by Spaceborne Along-Track InSARIEEE Transactions on Geoscience and Remote Sensing, 2007
- High resolution methods for multidimensional advection–diffusion problems in free-surface hydrodynamicsOcean Modelling, 2005
- Current measurements by SAR along-track interferometry from a Space ShuttleIEEE Transactions on Geoscience and Remote Sensing, 2005
- Current Measurements by Airborne Along-Track InSAR: Measuring Technique and Experimental ResultsIEEE Journal of Oceanic Engineering, 2005
- Semi-implicit numerical modeling of nonhydrostatic free-surface flows for environmental problemsMathematical and Computer Modelling, 2002
- An unstructured grid, three-dimensional model based on the shallow water equationsInternational Journal for Numerical Methods in Fluids, 2000
- Numerical study on the along-track interferometric radar imaging mechanism of oceanic surface currentsIEEE Transactions on Geoscience and Remote Sensing, 2000
- Ocean surface features and currents measured with synthetic aperture radar interferometry and HF radarPublished by American Geophysical Union (AGU) ,1996