Cranioplasty with Customized Titanium and PEEK Implants in a Mechanical Stress Model
- 10 April 2012
- journal article
- research article
- Published by Mary Ann Liebert Inc in Journal of Neurotrauma
- Vol. 29 (6), 1077-1083
- https://doi.org/10.1089/neu.2011.1794
Abstract
Large skull defects as a result of craniectomies due to cerebral insults, trauma, or tumors create functional and aesthetic disturbances for the patient. Cranioplasty with implants in these cases are an alternative to autogenous bone transplantation. In our clinic, customized titanium or optima poly-ether-ether ketone (PEEK) implants are used to reconstruct craniectomy defects. To compare the two materials we investigated the structural changes of the implants fixed to a sintered polyamide skull model under mechanical stress in four simplified models. In a standard testing machine, the models were subjected to a load under a quasi-static loading rate of 1.925 mm/min. Fractures of the PEEK implants occurred at a force of 24.2 and 24.5 kN with a displacement of 8.4 and 8 mm. The titanium implants showed no deformation, but extensive damage was seen in the polyamide skull models. The highest pressures achieved were 45.8 and 50.9 kN. In a simplified model with quasi-static loading, both implants withstood forces that were higher than those capable of causing skull fractures. It seems that the mechanical properties of PEEK could provide better protection when used for cranioplasty in patients after craniectomy if reconstruction with autogenous bone is not possible.This publication has 27 references indexed in Scilit:
- Effectiveness and Safety of Subcutaneous Abdominal Preservation of Autologous Bone Flap after Decompressive Craniectomy: A Prospective Pilot StudyWorld Neurosurgery, 2010
- Does Difference in the Storage Method of Bone Flaps After Decompressive Craniectomy Affect the Incidence of Surgical Site Infection After Cranioplasty? Comparison Between Subcutaneous Pocket and CryopreservationThe Journal of Trauma and Acute Care Surgery, 2010
- Calvarial Reconstruction With Polyetheretherketone ImplantsAnnals of Plastic Surgery, 2009
- Long-term results following titanium cranioplasty of large skull defectsNeurosurgical Focus, 2009
- Management of Postneurosurgical Bone Flap Loss Caused by InfectionPlastic and Reconstructive Surgery, 2008
- Tensile properties, tension–tension fatigue and biological response of polyetheretherketone–hydroxyapatite composites for load-bearing orthopedic implantsBiomaterials, 2003
- Nonresorbable polymers in bone surgeryInjury, 2000
- Biomedical application of functional polymersReactive and Functional Polymers, 1999
- Facial injury: A review of biomechanical studies and test procedures for facial injury assessmentJournal of Biomechanics, 1995
- Osseointegrated Titanium Implants:Requirements for Ensuring a Long-Lasting, Direct Bone-to-Implant Anchorage in ManActa Orthopaedica, 1981