A Multi-band CMOS Low Noise Amplifier for Multi-standard Wireless Receivers
- 1 May 2007
- conference paper
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 02714302,p. 2802-2805
- https://doi.org/10.1109/iscas.2007.378635
Abstract
A novel multi-band low noise amplifier (LNA) that allows simultaneous reception of signals from several wireless standards is designed and implemented using a 0.18-μm CMOS technology. The circuit topology consists of a 3-stage wideband LNA and 2 notch filters. The designed LNA can provide concurrent three bands over 0.935~5.825 GHz with measured gain (S21) of 15~24 dB, input reflection ratio (S11) of -35~-7 dB, noise figure (NF) of 4.4~4.78 dB, and 3 rd order input intercept point (IIP3) of -15.3~-12.4dBm respectively. In addition, a minimum 8 dB of inter-band gain suppression is achieved. This work has achieved a better figure of merit (FOM) than other related works, in terms of gain, noise figure and power consumption trade-offs.Keywords
This publication has 6 references indexed in Scilit:
- A 3-10-GHz low-noise amplifier with wideband LC-ladder matching networkIEEE Journal of Solid-State Circuits, 2004
- An ultrawideband CMOS low-noise amplifier for 3.1-10.6-GHz wireless receiversIEEE Journal of Solid-State Circuits, 2004
- A 1.5V multigigahertz CMOS tunable image reject notch filterPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2004
- Concurrent multiband low-noise amplifiers-theory, design, and applicationsIEEE Transactions on Microwave Theory and Techniques, 2002
- A sub-1-dB NF±2.3-kV ESD-protected 900-MHz CMOS LNAIEEE Journal of Solid-State Circuits, 2001
- A 900-MHz/1.8-GHz CMOS receiver for dual-band applicationsIEEE Journal of Solid-State Circuits, 1998