Comparative evaluation of surface porosities in conventional heat polymerized acrylic resin cured by water bath and microwave energy with microwavable acrylic resin cured by microwave energy
Open Access
- 1 January 2013
- journal article
- research article
- Published by Medknow in Contemporary Clinical Dentistry
- Vol. 4 (2), 147-151
- https://doi.org/10.4103/0976-237x.114844
Abstract
Background: Conventional heat cure poly methyl methacrylate (PMMA) is the most commonly used denture base resin despite having some short comings. Lengthy polymerization time being one of them and in order to overcome this fact microwave curing method was recommended. Unavailability of specially designed microwavable acrylic resin made it unpopular. Therefore, in this study, conventional heat cure PMMA was polymerized by microwave energy. Aim and Objectives: This study was designed to evaluate the surface porosities in PMMA cured by conventional water bath and microwave energy and compare it with microwavable acrylic resin cured by microwave energy. Materials and Methods: Wax samples were obtained by pouring molten wax into a metal mold of 25 mm × 12 mm × 3 mm dimensions. These samples were divided into three groups namely C, CM, and M. Group C denotes conventional heat cure PMMA cured by water bath method, CM denotes conventional heat cure PMMA cured by microwave energy, M denotes specially designed microwavable acrylic denture base resin cured by microwave energy. After polymerization, each sample was scanned in three pre-marked areas for surface porosities using the optical microscope. As per the literature available, this instrument is being used for the first time to measure the porosity in acrylic resin. It is a reliable method of measuring area of surface pores. Portion of the sample being scanned is displayed on the computer and with the help of software area of each pore was measured and data were analyzed. Results: Conventional heat cure PMMA samples cured by microwave energy showed maximum porosities than the samples cured by conventional water bath method and microwavable acrylic resin cured by microwave energy. Higher percentage of porosities was statistically significant, but well within the range to be clinically acceptable. Conclusion: Within the limitations of this in-vitro study, conventional heat cure PMMA can be cured by microwave energy without compromising on its property such as surface porosity.Keywords
This publication has 11 references indexed in Scilit:
- Influence of Double Flask Investing and Microwave Heating on the Superficial Porosity, Surface Roughness, and Knoop Hardness of Acrylic ResinJournal of Prosthodontics, 2009
- The effect of polymerization cycles on porosity of microwave-processed denture base resinThe Journal of Prosthetic Dentistry, 2004
- Evaluation of porosity in microwave-processed acrylic resin using a photographic methodThe Journal of Prosthetic Dentistry, 2002
- Porosity of denture resin cured by microwave energyThe Journal of Prosthetic Dentistry, 1991
- Rapid curing of acrylic denture-base materialsDental Materials, 1989
- A comparison of denture base acrylic resins polymerised by microwave irradiation and by conventional water bath curing systemsDental Materials, 1988
- Porosity in denture acrylic resins cured by microwave energy.1987
- Microwave polymerization of acrylic resins used in dental prosthesesThe Journal of Prosthetic Dentistry, 1987
- The occurrence of porosity in a heat-cured poly (methyl methacrylate) denture base resinThe Journal of Prosthetic Dentistry, 1986
- Applications of microwave for dental technique (part 1). Dough-forming and curing of acrylic resins.1983