Effect of process parameters on power requirements of vacuum swing adsorption technology for CO2 capture from flue gas
- 24 July 2007
- journal article
- Published by Elsevier BV in Energy Conversion and Management
- Vol. 49 (2), 346-356
- https://doi.org/10.1016/j.enconman.2007.06.007
Abstract
No abstract availableKeywords
This publication has 12 references indexed in Scilit:
- Optimization of Pressure Swing Adsorption and Fractionated Vacuum Pressure Swing Adsorption Processes for CO2 CaptureIndustrial & Engineering Chemistry Research, 2005
- New Pressure Swing Adsorption Cycles for Carbon Dioxide SequestrationAdsorption, 2005
- Pre-Combustion CO2 Capture Using Ceramic Absorbent and Methane Steam ReformingJournal of the Ceramic Society of Japan, 2005
- Effect of Rinse and Recycle Methods on the Pressure Swing Adsorption Process To Recover CO2 from Power Plant Flue Gas Using Activated CarbonIndustrial & Engineering Chemistry Research, 2002
- Numerical Analysis on the Power Consumption of the PSA Process for Recovering CO2 from Flue GasIndustrial & Engineering Chemistry Research, 2002
- Application of the Circulating Moving Bed Process for CO2 Recovery from the Flue Gas of Coal-Thermal Power Plants.KAGAKU KOGAKU RONBUNSHU, 2002
- Technology for removing carbon dioxide from power plant flue gas by the physical adsorption methodEnergy Conversion and Management, 1996
- Comparison of Activated Carbon and Zeolite 13X for CO2 Recovery from Flue Gas by Pressure Swing AdsorptionIndustrial & Engineering Chemistry Research, 1995
- Non-isothermal Adsorption of Nitrogen-carbon Dioxide Mixture in a Fixed Bed of Zeolite-X.JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 1994
- CO/sub 2/ recovery in molten carbonate fuel cell system by pressure swing adsorptionIEEE Transactions on Energy Conversion, 1993