Structural characterization of biomass pyrolysis tars/oils from eucalyptus wood waste: effect of H2 pressure and sample configuration
- 1 September 1997
- journal article
- Published by Elsevier BV in Fuel
- Vol. 76 (11), 1013-1023
- https://doi.org/10.1016/s0016-2361(97)00092-6
Abstract
No abstract availableKeywords
This publication has 33 references indexed in Scilit:
- A comparison of the pyrolysis of coal in wire-mesh and entrained-flow reactorsFuel, 1995
- Analysis of aromatic hydrocarbons in pyrolytic oil derived from biomassJournal of Analytical and Applied Pyrolysis, 1995
- Effect of reactor configuration on the yields and structures of pine-wood derived pyrolysis liquids: A comparison between ablative and wire-mesh pyrolysisBiomass and Bioenergy, 1994
- Characterization of biomass pyrolysis tars produced in the relative absence of extraparticle secondary reactionsFuel, 1991
- Pyrolysis and hydropyrolysis of coal: comparison of product distributions from a wire-mesh and a hot-rod reactorFuel, 1991
- Developments in direct thermochemical liquefaction of biomass: 1983-1990Energy & Fuels, 1991
- Comparison of coal pyrolysis product distributions from three captive sample techniquesFuel, 1990
- Secondary reactions of flash pyrolysis tars measured in a fluidized bed pyrolysis reactor with some novel design featuresFuel, 1989
- Molecular characterization of the pyrolysis of biomass. 2. ApplicationsEnergy & Fuels, 1987
- Molecular characterization of the pyrolysis of biomassEnergy & Fuels, 1987