Lightweight ironless-stator PM generators for direct-drive wind turbines
- 1 January 2005
- journal article
- Published by Institution of Engineering and Technology (IET) in IEE Proceedings - Electric Power Applications
- Vol. 152 (1), 17-26
- https://doi.org/10.1049/ip-epa:20041084
Abstract
A permanent-magnet electrical machine that employs lightweight spoked structures for both rotor and stator is described. The stator is ironless so that there is no direct magnetic attraction between rotor and stator. The lightweight structures are sufficient to carry the small forces due to the interaction of the permanent magnet field with the stator winding current. Despite the absence of stator iron and a large airgap, rare-earth magnets are able to create a working flux density of about 0.25 T at the winding. This is sufficient for an effective generator design because the lightweight structures offer the opportunity to build generators of unprecedented diameter. The outcome is a generator that has a mass typically 20–30% of equivalent designs based on iron-cored magnetic circuits, and with efficiency greater than 90%.Keywords
This publication has 2 references indexed in Scilit:
- Polynomial modelling of electromechanical devices: an efficient alternative to look-up tablesIEE Proceedings - Electric Power Applications, 2004
- Prospects for magnetization of large pm rotors: conclusions from a development case studyIEEE Transactions on Energy Conversion, 2003