MRI-based, wireless determination of the transfer function of a linear implant: Introduction of the transfer matrix
Open Access
- 1 December 2018
- journal article
- research article
- Published by Wiley in Magnetic Resonance in Medicine
- Vol. 80 (6), 2771-2784
- https://doi.org/10.1002/mrm.27218
Abstract
Purpose: We introduce the transfer matrix (TM) that makes MR-based wireless determination of transfer functions (TFs) possible. TFs are implant specific measures for RF-safety assessment of linear implants. The TF relates an incident tangential electric field on an implant to a scattered electric field at its tip that generally governs local heating. The TM extends this concept and relates an incident tangential electric field to a current distribution in the implant therewith characterizing the RF response along the entire implant. The TM is exploited to measure TFs with MRI without hardware alterations. Theory and Methods: A model of rightward and leftward propagating attenuated waves undergoing multiple reflections is used to derive an analytical expression for the TM. This allows parameterization of the TM of generic implants, e.g., (partially) insulated single wires, in a homogeneous medium in a few unknowns that simultaneously describe the TF. These unknowns can be determined with MRI making it possible to measure the TM and, therefore, also the TF. Results: The TM is able to predict an induced current due to an incident electric field and can be accurately parameterized with a limited number of unknowns. Using this description the TF is determined accurately (with a Pearson correlation coefficient R >= 0.9 between measurements and simulations) from MRI acquisitions. Conclusion: The TM enables measuring of TFs with MRI of the tested generic implant models. The MR-based method does not need hardware alterations and is wireless hence making TF determination in more realistic scenarios conceivable.Keywords
This publication has 34 references indexed in Scilit:
- Electric properties tomography: Biochemical, physical and technical background, evaluation and clinical applicationsNMR in Biomedicine, 2017
- MRI‐based transfer function determination for the assessment of implant safetyMagnetic Resonance in Medicine, 2017
- A Technique to Evaluate MRI-Induced Electric Fields at the Ends of Practical Implanted LeadIEEE Transactions on Microwave Theory and Techniques, 2014
- The dependence of radiofrequency induced pacemaker lead tip heating on the electrical conductivity of the medium at the lead tipMagnetic Resonance in Medicine, 2011
- B Phase mapping at 7 T and its application for in vivo electrical conductivity mappingMagnetic Resonance in Medicine, 2011
- Designing passive MRI‐safe implantable conducting leads with electrodesMedical Physics, 2010
- New method to monitor RF safety in MRI‐guided interventions based on RF induced image artefactsMedical Physics, 2010
- Spatial distribution of RF‐induced E‐fields and implant heating in MRIMagnetic Resonance in Medicine, 2008
- Calculation of MRI‐induced heating of an implanted medical lead wire with an electric field transfer functionJournal of Magnetic Resonance Imaging, 2007
- RF heating due to conductive wires during MRI depends on the phase distribution of the transmit fieldMagnetic Resonance in Medicine, 2002