Intermediate temperature proton conductors for PEM fuel cells based on phosphonic acid as protogenic group: A progress report
- 27 February 2007
- journal article
- review article
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 9 (15), 1764-1773
- https://doi.org/10.1039/b618686f
Abstract
The melting behaviour and transport properties of straight chain alkanes mono- and difunctionalized with phosphonic acid groups have been investigated as a function of their length. The increase of melting temperature and decrease of proton conductivity with increasing chain length is suggested to be the consequence of an increasing ordering of the alkane segments which constrains the free aggregation of the phosphonic acid groups. However, the proton mobility is reduced to a greater extent than the proton diffusion coefficient indicating an increasing cooperativity of proton transport with increasing length of the alkane segment. The results clearly indicate that the “spacer concept”, which had been proven successful in the optimization of the proton conductivity of heterocycle based systems, fails in the case of phosphonic acid functionalized polymers. Instead, a very high concentration of phosphonic acid functional groups forming “bulky” hydrogen bonded aggregates is suggested to be essential for obtaining very high proton conductivity. Aggregation is also suggested to reduce condensation reactions generally observed in phosphonic acid containing systems. On the basis of this understanding, the proton conductivities of poly(vinyl phosphonic acid) and poly(meta-phenylene phosphonic acid) are discussed. Though both polymers exhibit a substantial concentration of phosphonic acid groups, aggregation seems to be constrained to such an extent that intrinsic proton conductivity is limited to values below σ = 10–3 S cm–1 at T = 150 °C. The results suggest that different immobilization concepts have to be developed in order to minimize the conductivity reduction compared to the very high intrinsic proton conductivity of neat phosphonic acid under quasi dry conditions. In the presence of high water activities, however, (as usually present in PEM fuel cells) the very high ion exchange capacities (IEC) possible for phosphonic acid functionalized ionomers (IEC >10 meq g–1) may allow for high proton conductivities in the intermediate temperature range (T ∼ 120 –160 °C).Keywords
This publication has 58 references indexed in Scilit:
- Transport in Proton Conductors for Fuel-Cell Applications: Simulations, Elementary Reactions, and PhenomenologyChemical Reviews, 2004
- On Solids with Liquidlike Properties and the Challenge To Develop New Proton-Conducting Separator Materials for Intermediate-Temperature Fuel CellsChemphyschem, 2002
- Imidazole and 1-methyl imidazole in phosphoric acid doped polybenzimidazole, electrolyte for fuel cellsSolid State Ionics, 2002
- On the complexity of proton conduction phenomenaSolid State Ionics, 2000
- Imidazole and pyrazole-based proton conducting polymers and liquidsElectrochimica Acta, 1998
- Fast proton conductivity: A phenomenon between the solid and the liquid state?Solid State Ionics, 1997
- Proton transport mechanism in concentrated aqueous solutions and solid hydrates of acidsSolid State Ionics, 1991
- Proton transport in some heteropolyacidhydrates a single crystal PFG-NMR and conductivity studySolid State Ionics, 1988
- Proton conductivity in the layer compound H3OUO2AsO4·3H2O (HU As)Applied Physics A, 1983
- Proton conduction in zeolitesMaterials Research Bulletin, 1982