Development of Hub Corner Stall and Its Influence on the Performance of Axial Compressor Blade Rows
- 1 January 1999
- journal article
- Published by ASME International in Journal of Turbomachinery
- Vol. 121 (1), 67-77
- https://doi.org/10.1115/1.2841235
Abstract
A detailed investigation has been performed to study hub corner stall phenomena in compressor blade rows. Three-dimensional flows in a subsonic annular compressor stator and in a transonic compressor rotor have been analyzed numerically by solving the Reynolds-averaged Navier–Stokes equations. The numerical results and the existing experimental data are interrogated to understand the mechanism of compressor hub corner stall. Both the measurements and the numerical solutions for the stator indicate that a strong twisterlike vortex is formed near the rear part of the blade suction surface. Low-momentum fluid inside the hub boundary layer is transported toward the suction side of the blade by this vortex. On the blade suction surface near the hub, this vortex forces fluid to move against the main flow direction and a limiting stream surface is formed near the hub. The formation of this vortex is the main mechanism of hub corner stall. When the aerodynamic loading is increased, the vortex initiates further upstream, which results in a larger corner stall region. For the transonic compressor rotor studied in this paper, the numerical solution indicates that a mild hub corner stall exists at 100 percent rotor speed. The hub corner stall, however, disappears at the reduced blade loading, which occurs at 60 percent rotor design speed. The present study demonstrates that hub corner stall is caused by a three-dimensional vortex system and that it does not seem to be correlated with a simple diffusion factor for the blade row.Keywords
This publication has 12 references indexed in Scilit:
- Experimental and Computational Investigation of the Tip Clearance Flow in a Transonic Axial Compressor RotorJournal of Turbomachinery, 1996
- Three-Dimensional Flow Phenomena in a Transonic, High-Throughflow, Axial-Flow Compressor StageJournal of Turbomachinery, 1993
- The Role of Tip Clearance in High-Speed Fan StallJournal of Turbomachinery, 1993
- Three-Dimensional Flowfields Inside a Transonic Compressor With Swept BladesJournal of Turbomachinery, 1991
- Experimental and Numerical Investigation of Three-Dimensional Viscous Flows and Vortex Motion Inside an Annular Compressor Blade RowJournal of Turbomachinery, 1991
- Experimental Investigation of the Three-Dimensional Flow in an Annular Compressor CascadeJournal of Turbomachinery, 1988
- Calculation of three-dimensional viscous flows in turbomachinery with an implicit relaxation methodJournal of Propulsion and Power, 1987
- Three-Dimensional Flows and Loss Reduction in Axial CompressorsJournal of Turbomachinery, 1987
- Axial Compressor Stator AerodynamicsJournal of Engineering for Gas Turbines and Power, 1985
- An Investigation of Axial Compressor Rotor AerodynamicsJournal of Engineering for Power, 1982