Bacterial assay for the rapid assessment of antifouling and fouling release properties of coatings and materials
- 29 December 2009
- journal article
- research article
- Published by Oxford University Press (OUP) in Journal of Industrial Microbiology & Biotechnology
- Vol. 37 (4), 363-370
- https://doi.org/10.1007/s10295-009-0681-1
Abstract
An assay has been developed to accurately quantify the growth and release behaviour of bacterial biofilms on several test reference materials and coatings, using the marine bacterium Cobetia marina as a model organism. The assay can be used to investigate the inhibition of bacterial growth and release properties of many surfaces when compared to a reference. The method is based upon the staining of attached bacterial cells with the nucleic acid-binding, green fluorescent SYTO 13 stain. A strong linear correlation exists between the fluorescence of the bacterial suspension measured (RFU) using a plate reader and the total bacterial count measured with epifluorescence microscopy. This relationship allows the fluorescent technique to be used for the quantification of bacterial cells attached to surfaces. As the bacteria proliferate on the surface over a period of time, the relative fluorescence unit (RFU) measured using the plate reader also shows an increase with time. This was observed on all three test surfaces (glass, Epikote and Silastic T2) over a period of 4 h of bacterial growth, followed by a release assay, which was carried out by the application of hydrodynamic shear forces using a custom-made rotary device. Different fixed rotor speeds were tested, and based on the release analysis, 12 knots was used to provide standard shear force. The assay developed was then applied for assessing three different antifouling coatings of different surface roughness. The novel assay allows the rapid and sensitive enumeration of attached bacteria directly on the coated surface. This is the first plate reader assay technique that allows estimation of irreversibly attached bacterial cells directly on the coated surface without their removal from the surface or extraction of a stain into solution.Keywords
This publication has 40 references indexed in Scilit:
- The potential of nano-structured silicon oxide type coatings deposited by PACVD for control of aquatic biofoulingBiofouling, 2009
- Fluorination of poly(dimethylsiloxane) surfaces by low pressure CF4 plasma – physicochemical and antifouling propertiesExpress Polymer Letters, 2009
- A marine bacterial adhesion microplate test using the DAPI fluorescent dye: a new method to screen antifouling agentsLetters in Applied Microbiology, 2007
- Use of the modified robbins device and fluorescent staining to screen plant extracts for the inhibition of S. mutans biofilm formationJournal of Microbiological Methods, 2006
- A microplate spectrofluorometric assay for bacterial biofilmsJournal of Industrial Microbiology & Biotechnology, 2006
- Algal antifouling and fouling-release properties of metal surfaces coated with a polymer inspired by marine musselsBiofouling, 2006
- Factors that influence elastomeric coating performance: the effect of coating thickness on basal plate morphology, growth and critical removal stress of the barnacleBalanus amphitriteBiofouling, 2006
- Compatibility of the green fluorescent protein and a general nucleic acid stain for quantitative description of a Pseudomonas putida biofilmJournal of Microbiological Methods, 2005
- Inhibition and facilitation of settlement of epifaunal marine invertebrate larvae by microbial biofilm cuesBiofouling, 1998
- The testing and evaluation of non‐toxic antifouling coatingsBiofouling, 1996