An engineering approach for rapid evaluation of traction coefficient and wear in mixed EHL
- 20 May 2015
- journal article
- Published by Elsevier BV in Tribology International
- Vol. 92, 184-190
- https://doi.org/10.1016/j.triboint.2015.05.013
Abstract
No abstract availableKeywords
This publication has 42 references indexed in Scilit:
- Film Thickness and Asperity Load Formulas for Line-Contact Elastohydrodynamic Lubrication With Provision for Surface RoughnessJournal of Tribology, 2012
- Combined Effects of Shear Thinning and Viscous Heating on EHL Characteristics of Rolling/Sliding Line ContactsJournal of Tribology, 2008
- An Asperity Microcontact Model Incorporating the Transition From Elastic Deformation to Fully Plastic FlowJournal of Tribology, 1999
- Temperature Rise Simulation of Three-Dimensional Rough Surfaces in Mixed Lubricated ContactJournal of Tribology, 1998
- Thermal EHL Analysis of Circular Contacts With Measured Surface RoughnessJournal of Tribology, 1996
- Maximum and Average Flash Temperatures in Sliding ContactsJournal of Tribology, 1994
- Traction in Thermal Elastohydrodynamic Lubrication of Rough SurfacesJournal of Tribology, 1992
- A Sliding Wear Model for Partial-EHL ContactsJournal of Tribology, 1991
- SIMPLE FORMULAS FOR PERFORMANCE PARAMETERS USED IN ELASTOHYDRODYNAMICALLY LUBRICATED LINE CONTACTSJournal of Tribology, 1989
- A Rheological Model for Elastohydrodynamic Contacts Based on Primary Laboratory DataJournal of Lubrication Technology, 1979