An Electronic Throttle Control Strategy Including Compensation of Friction and Limp-Home Effects
- 24 May 2004
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 40 (3), 821-834
- https://doi.org/10.1109/tia.2004.827441
Abstract
An electronic throttle is a low-power dc servo drive which positions the throttle plate. Its application in modern automotive engines leads to improvements in vehicle drivability, fuel economy, and emissions. Transmission friction and the return spring limp-home nonlinearity significantly affect the electronic throttle performance. The influence of these effects is analyzed by means of computer simulations, experiments, and analytical calculations. A dynamic friction model is developed in order to adequately capture the experimentally observed characteristics of the presliding-displacement and breakaway effects. The linear part of electronic throttle process model is also analyzed and experimentally identified. A nonlinear control strategy is proposed, consisting of a proportional-integral-derivative (PID) controller and a feedback compensator for friction and limp-home effects. The PID controller parameters are analytically optimized according to the damping optimum criterion. The proposed control strategy is verified by computer simulations and experiments.Keywords
This publication has 20 references indexed in Scilit:
- An integrated friction model structure with improved presliding behavior for accurate friction compensationIEEE Transactions on Automatic Control, 2000
- Robust control of a throttle body for drive by wire operation of automotive enginesIEEE Transactions on Control Systems Technology, 2000
- Throttle actuator control system for vehicle traction controlMechatronics, 1999
- Design of reduced-order feedforward controllerPublished by Institution of Engineering and Technology (IET) ,1998
- Modeling and identification of an electromechanical internal combustion engine throttle bodyControl Engineering Practice, 1997
- A new model for control of systems with frictionIEEE Transactions on Automatic Control, 1995
- A survey of models, analysis tools and compensation methods for the control of machines with frictionAutomatica, 1994
- On the Modeling and Simulation of FrictionJournal of Dynamic Systems, Measurement, and Control, 1991
- Adaptive Pulse Width Control for Precise Positioning Under the Influence of Stiction and Coulomb FrictionJournal of Dynamic Systems, Measurement, and Control, 1988
- Adaptive bearing friction compensation based on recent knowledge of dynamic frictionAutomatica, 1984