Effect of bentonite slurry on the function of foam for changing the permeability characteristics of sand under high hydraulic gradients
- 1 July 2022
- journal article
- research article
- Published by Canadian Science Publishing in Canadian Geotechnical Journal
- Vol. 59 (7), 1061-1070
- https://doi.org/10.1139/cgj-2021-0196
Abstract
During earth pressure balance (EPB) shield tunnelling in sandy ground, not only foam but also other conditioning agents need to be injected to reduce the permeability of muck and avoid water spewing out of the screw conveyor. Permeability tests were carried out to study the permeability characteristics of conditioned sand under high hydraulic gradients. A low bentonite slurry injection ratio (BIR) enhanced the workability of foam-conditioned sand. As the hydraulic gradient increased, the initial permeability coefficient of conditioned sand increased, and the initial stable period became shorter or disappeared. The BIR had a more significant effect on the permeability of conditioned sand than the foam injection ratio (FIR), and this effect gradually weakened as the hydraulic gradient increased. The initial permeability coefficient of the foam-bentonite slurry-conditioned sand decreased by approximately an order of magnitude compared with that of the foam-conditioned sand. With the addition of bentonite slurry, suitable sand conditioning can accept a higher water content (w) and lower FIR, resulting in suitable ranges of w and FIR that are more flexible. Finally, the mechanism of stabilizing foam under the action of bentonite slurry was discussed by considering the interaction between foam bubbles and fine particles.Keywords
This publication has 37 references indexed in Scilit:
- Study of the Permeability of Foam Conditioned Soils with Laboratory TestsAmerican Journal of Environmental Sciences, 2010
- Surfactant foams doped with laponite: unusual behaviors induced by aging and confinementSoft Matter, 2009
- Specific Surface Area Model for Foam PermeabilityLangmuir, 2008
- The role of particles in stabilising foams and emulsionsAdvances in Colloid and Interface Science, 2008
- On the equation of the maximum capillary pressure induced by solid particles to stabilize emulsions and foams and on the emulsion stability diagramsColloids and Surfaces A: Physicochemical and Engineering Aspects, 2006
- Use of chemical foam for improvements in drilling by earth-pressure balanced shields in granular soilsTunnelling and Underground Space Technology, 1998
- Analysis of Hydraulic Gradient Effects for Laboratory Hydraulic Conductivity TestingGeotechnical Testing Journal, 1996
- Hydraulic conductivity of compacted bentonite–sand mixturesCanadian Geotechnical Journal, 1992
- Sand–bentonite liners: predicting permeability from laboratory testsCanadian Geotechnical Journal, 1990
- Measurement of the Hydraulic Conductivity of Fine-Grained SoilsPublished by ASTM International ,1981