Weathering processes such as softening and freeze–thaw cycling affect the properties of clays. Care must therefore be taken when selecting strength and compressibility parameters for analysis of natural slopes, compacted clay embankments, and trench excavations in which significant proportions of the cross section can be affected by climatic weathering.Samples of plastic Lake Agassiz clay from Winnipeg were consolidated anisotropically in the laboratory to axial stresses less than or equal to the in situ effective overburden pressure. They were therefore all overconsolidated with respect to the field preconsolidation pressure. The samples were then loaded under drained or undrained conditions along steeply rising stress paths in p′, q stress space. One group of samples was tested immediately to identify the "undisturbed" behavior, a second group was subjected to freeze–thaw cycles, and a third group allowed to swell freely before testing.The freeze–thaw cycling produced increased compressibility and pore-water pressures, and reduced strengths at low stresses compared with the behavior of undisturbed clay. Freezing also caused the development of a clearly defined fissure structure. Softening at low stresses with access to water produced less marked effects. Key words: clay, undisturbed, freeze–thaw, softening, strength, yielding, pore-water pressures.