Methods for determining the methane generation potential and methane generation rate constant for the FOD model: a review
- 30 January 2018
- journal article
- review article
- Published by SAGE Publications in Waste Management & Research: The Journal for a Sustainable Circular Economy
- Vol. 36 (3), 200-220
- https://doi.org/10.1177/0734242x17753532
Abstract
In the first order decay (FOD) model of landfill methane generation, the methane generation potential (L0) and methane generation rate constant (k) for both bulk municipal solid waste (MSW) and individual waste components have been determined by a variety of approaches throughout various literature. Differences in the determination methods for L0 and k are related to differences in our understanding of the waste decomposition dynamics. A thorough understanding of the various available methods for determining L0 and k values is critical for comparative study and the drawing of valid conclusions. The aim of this paper is to review the literature on the available determining methods and the ranges for L0 and k values of both bulk MSW and individual waste components, while focusing on understanding the decomposition of waste, including the role of lignin. L0 estimates in the literature are highly variable and have been derived from theoretical stoichiometric calculations, laboratory experiments, or actual field measurements. The lignin concentration in waste is correlated with the fraction of total degradable organic carbon (DOCf) that will actually anaerobically degrade in the landfill. The k value has been determined by precipitation rates, laboratory simulations, aged-defined waste sample, and model fitting or regression analysis using actual gas data. However, the lignin concentration does not correlate well with the k value, presumably due to the impact of lignin arrangement and structure on cellulose bioavailability and degradation rate. In sum, this review summarizes the literature on the measurement of L0 and k values, including the dynamics and decomposition of bulk MSW and individual waste components within landfills.Keywords
This publication has 107 references indexed in Scilit:
- Alternative methods for determining anaerobic biodegradability: A reviewProcess Biochemistry, 2009
- Building a better methane generation model: Validating models with methane recovery rates from 35 Canadian landfillsWaste Management, 2009
- Abundance of 14C in biomass fractions of wastes and solid recovered fuelsWaste Management, 2009
- Landfill gas generation after mechanical biological treatment of municipal solid waste. Estimation of gas generation rate constantsWaste Management, 2009
- Achieving “Final Storage Quality” of municipal solid waste in pilot scale bioreactor landfillsWaste Management, 2009
- Methane generation in tropical landfills: Simplified methods and field resultsWaste Management, 2008
- The decomposition of wood products in landfills in Sydney, AustraliaWaste Management, 2008
- The effect of lignin and sugars to the aerobic decomposition of solid wastesWaste Management, 2003
- Modeling biogas production at landfill siteResources, Conservation and Recycling, 1999
- A Numerical Model for Methane Production in Managed Sanitary LandfillsWaste Management & Research: The Journal for a Sustainable Circular Economy, 1989