Polymeric arrayed-waveguide grating multiplexer operating around 1.3 µm
- 9 June 1994
- journal article
- Published by Institution of Engineering and Technology (IET) in Electronics Letters
- Vol. 30 (12), 959-960
- https://doi.org/10.1049/el:19940679
Abstract
An arrayed-waveguide grating multiplexer is demonstrated, which is fabricated using deuterated fluoro-methacrylate polymers. A channel spacing of 0.65 nm, a crosstalk of less than –20dB, and a loss of 7.8–11 dB are obtained around 1.3 µm. The multiplexer exhibits small polarisation shift of 0.03 nm without special compensation methods.Keywords
This publication has 7 references indexed in Scilit:
- Polymer waveguide thermooptic switch with low electric power consumption at 1.3 mu mIEEE Photonics Technology Letters, 1993
- Polarization-insensitive arrayed-waveguide wavelength multiplexer with birefringence compensating filmIEEE Photonics Technology Letters, 1993
- Polarisation independent 8×8 waveguide grating multiplexer on InPElectronics Letters, 1993
- Polarization-insensitive arrayed-waveguide grating wavelength multiplexer on siliconOptics Letters, 1992
- Ring resonator composed of low loss polymer waveguides at 1.3 μmElectronics Letters, 1992
- Polymer channel waveguides with low loss at 1.3 μmElectronics Letters, 1991
- Low loss channel waveguides in polymersJournal of Lightwave Technology, 1989